Reveal IDE CDROM  Interface Card
		P/N: 13-004-102

Software Installation:    

Before you install the software for your new CDROM .

1.    If you already have a CDROM line with the MSCDEXE.EXE in it and the new 
      CDROM will become the only CDROM in your system, please remove that 
      line and then install the software. Do the same in the CONFIG.SYS file.

2.   If you are planning to use the CDROM with a secondary IDE Interface Card, 
     you should add another section to your existing CDROM line as follows:
     
	For the Autoexec.Bat file:      
	
			C:\DOS\MESCDEX.EXE /D:MSCD000 /D:MSCD001 
      
  [The last parameter is to ensure that both CDROM's have different ID's.]




	____ End of file _____