Verion 0.01
                                                 °
                          ÜÜÜÜÜÜÜÜÜÜÜ    ÜÛÛÛÛÛÛÛ²ÛÛÛÛÜ
                         ÛÛÛÛÛÛÛÛÛÛÛÛÛ    ÛÛÛÛ²Û²±²²ÛÛÝ kURRUPt/XPRESS
   Ûßßßß²ßßßßßßßßß²ßßßßß ÛÛÛÛÛÛ²²ÛÛÛÛÝ ßß ÞÛÛÛÛÛÛ²ÛÛÛÛÝßßßßßßßßßßß²ßßßß²ßßßßÛ
   Û ÛÛÛÛÛÛÛÛÛÛßÛÛÛÛÛÛÛÛÝÞÛÛÛÛÛÛÛÛÛÛÛÛ ß ÜÛÛÛÛÛÛÛÛÛÛÛÛ ßßßßßß²ÛÛÛÛßÛÛÛÛÛÛÛÛ Û
   ÛܲÛÛÛÛßÛÜÛÜ°ÜÛ²ßß Ü   ßÛÛÛÛÛÛÛÛÛÛÛÛÜÜÜܲÜÜÜܲßß²ß  °°°   þ ßÛÜ°ÜÛÛÛÛßÛ²ßÛ
   Û ÛÛß°ßÛÛÛßÛÛßÛ þ ß²ß  ÜÜܲÜܲßß²ßßßß²ÛÛÛÛÛÛÛÛÛÛÛÛÜÜ   Ü²Ü    ²ÛßÛÛÛÜ°ÜÛ Û
   Û ÛÛÛÜÛÛÛÜ°ÜÛÛÛÝ °° ÜÛÛÛÛÛÛÛÛÛÛÛßß °    ßÛÛÛÛÛÛÛÛÛÛÛÛÝ  ß  °  ÞÛÛßÛÛÛÛÛÛßÛ
   ÛܲÛÛß ÜÜÜÜ ßßß    ÜÜÜÜ ßßßßßß ÜÜÜÜ      ß ÜÜÜÜ ßßßßß² ÜÜÜÜ    ßßÛÛÜÛß°ß Û
   Û ÛÛÛ ßÛÛÛÛßßÛÛÛÜ ßÛÛÛÛßßÛÛÛÜ ßÛÛÛÛßßÛÛÛÜ ßÛÛÛÛßßÛÛÛÜ ßÛ²²ÛßßÛÛÛÜ ÛÛÛÛÜÛ Û
   Û ÛÛÛÛ Û²ÛÛ  ÞÛÛÛÝ ²²ÛÛ ÝÞÛÛÛÝ ÛÛÛÛ  ÞÛÛÛÝ ÛÛÛÛ ÝÞÛÛÛÝ Û²ÛÛ  ÞÛÛÛÝÞÛÛÛÜÛ Û
   Û ß°ßÛ Û²ÛÛ ° ÛÛÛÛ ÛÛÛÛ Û ÛÛÛ²°²²ÛÛ °°²ÛÛ²°²²ÛÛÜÜÜÜÜÜ  ÛÛÛÛÜÜÜÜÜÜ ßÛß°ßÛ Û
   Û ÛÜÛÛ ²±²² ° ÛÛÛÛÜÛÛÛÛÜÜÜÛÛÛß ÛÛÛÛÜÜÜÛÛÛÛ ÜÜÜÜ  ßÛÛÛÛ ÜÜÜÜ  ßÛÛÛÛ ßÛÜÛÛ Û
   Û ÛÛÛß Û²ÛÛ   Û²Û²°²²ÛÛ  ßÛÛÛÛÜ ÛÛÛ   ÜÜÜÜܲÛÛÛ ß ÛÛ²Û²°²²Û ktÛÛÛÛÛ ÛÛܲÜÛ
   Û ÛÛÛ ßÛÛÛÛßßßßßßß ÛÛÛÛ Û ÛÛÛÛ²°²ÛÛ²ÜÜÛÛÛÛÛ ÛÛÛ²ÜÜÛÛÛÛÛÜÛÛÛ²ÜÜÛÛÛÛÛÜ ÛÛÛ Û
   Û ÛÛÛÛ ßßßßß  Ü  ÞÜÜÜÜÜÜÛ ßßßßß°      ßßßßß ÜÜÜÜÜ ßßßßß       ßßßßß ÜÛÛÛ Û
   Ûܲ߰ßÛ²Ü    ß²ß ÛÛ²²ÛÛÛÛÛÛÛÛÝ  °°°  ÜܲÜÜ Þ²²ÛÛÛÛÛÛÛÛÛÛ ÜÜ   °°  ÛÛ²ß°ß Û
   Û ÛÛܲßÛÛÛß²ÜÜÜ ÜÛÛÛ²²ÛÛÛÛÛÛÛÛÜ   ÜÜÛßÛÛÛ ÜÛÛÛÛÛÛÛÛÛÛÛÛÛÜ ÛÛ²ÜÜÜܲÛÛÛÛÜÛ Û
   Û ÛÛÛÛÛÛÜÛÛÛÛÛÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛÛÛÛÜ°ÜÛÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛÛÛÛÜÛÛÛÛÛÛÛÛÛßÛ
   ÛÜÜÜÜÜܲÜÜÜÜÜܲÜÜÜÜÜÜÜܲÜÜÜÜÜÜÜÜܲÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜܲÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜܲÜÜÛ
 -----------------------------------------------------------------------------
    Trippah of xPRESS mOddING presents XRead Version 0.01. (PCBOARD UTILITY)
 -----------------------------------------------------------------------------

.----------------,
| iNTRODUCTiON!  |
)----------------|------------ --------------------   -------  ------ --  -
| Well this is once again used on my board and id thought its good enough
| for releasing since Krisis wants heaps of modds for the next comming pack
| of xpress moddification.
| It replaces the (R)ead Messages command in PCBoard with great simple 
| graphics and two different modes for more advantages to your users!
|
)-----------,
| FEAtURES! |
)-----------|-------- ---------------   ------------ ------------ ------ -
| This PPE has been compiled using PPLC Verion 3.20 so it maybe only used on
| Boards using PCB version 15.2 or higher. These functions have been added
| to the program, and for your understanding and good use of this program
| here is the list of what goes on in XRead V0.01.
|
| Xpert Mode -- This mode is used for the users who are used to using PCBoard.
| ~~~~~~~~~~    It will just prompt the user for the command he wants to exec.
|               while using the (R)ead command. (ie. -, +, s,)
|
| Amature Mode -- This mode is for the users who are unfamiliar with PCBoard.
| ~~~~~~~~~~~~    It will bring up a lightbar menu with simple defenitions
|                 of what the commands do. By using his/her cursor keys, he
|                 May move the lightbar up/down and enter to pick the chosen.
|
| Recognition of Tokens -- The PPE has been written so that if a user knows
| ~~~~~~~~~~~~~~~~~~~~~    PCBoard very well and enters a command from the
|                          menu looking something simular to R;- or R -, it
|                          will recognise that the user is familiar with
|                          PCBoard and use the Parameters used with "R" as
|                          the sub command(s).
|
| Configuration Power -- I have tryed to make this as configurable as possible
| ~~~~~~~~~~~~~~~~~~~    as you will see in the file XREAD001.CFG.
|                        You must edit this file using your favourite text
|                        editor if you want to change the looks of the PPE.
|
)---------------,
| iNSTALLATiON! |
)---------------|-------- ---------------   -------  --------- ------ -
| Ok nice and simple here, just follow the instructions step by step.
| 
|   1: Unpack the archive to a directory of your choice. 
|      (for argument sakes, i will be using "C:\PCB\PPE\READ" in this doc)
|
|   2: Edit the file XREAD001.CFG if you must
| 
|   3: Logon to the bbs and run the PPE once to make sure that it works ok
|      and so it can uncompress its data files.
|
|   4: Run PCBSETUP.EXE and goto the file CMD.LST and in the command "R"
|      Place the PPEPath, and filename. (ie. C:\PCB\PPE\READ\XREAD001.PPE")
|
)------------,
| UPGRADiNG! |
)------------|----------  ------------------  ---------- -------   --    -
| 
| This is the first public release. There is no way of upgrading yet.
|
)---------,
| ENDiSM! |
)---------|----------  --------------------  ---------- -------   --    -
| if you encounter any bugs in this ppe, please email me via the internet
| on -- Trippah@midian.apana.org.au -- i scan through madness network and
| fORCENEt too.
|
| Shout outs to Av, fRC, mUR members..
`----------------------------------------------[tRIP.xPS.SENiOR]------- -- -