===================================================================
                 WW0407: RIPLMEM.EXE FOR REMOTE BOOT
              WORKSTATIONS AND WINDOWS 386 ENHANCED MODE
 ===================================================================

 --------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an            |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY      |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO    |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A     |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the     |
| accuracy and the use of this Application Note. This Application    |
| Note may be copied and distributed subject to the following        |
| conditions: 1) All text must be copied without modification and    |
| all pages must be included; 2) If software is included, all files  |
| on the disk(s) must be copied without modification (the DOS        |
| utility DISKCOPY is appropriate for this purpose); 3) All          |
| components of this Application Note must be distributed together;  |
| and 4) This Application Note may not be distributed for profit.    |
|                                                                    |
| Copyright 1991 Microsoft Corporation. All Rights Reserved.         |
| Microsoft and the Microsoft logo are registered trademarks and     |
| Windows is a tradmark of Microsoft Corporation.                    |
 --------------------------------------------------------------------

The enclosed disk contains RIPLMEM.EXE, a memory-resident program that
allows you to run Windows version 3.00 in 386 enhanced mode on
workstations that are booted from a network server (not from a local
floppy or hard disk drive).

Using RIPLMEM.EXE
-----------------

To enable 386 enhanced mode on a workstation:

1. Copy RIPLMEM.EXE from the enclosed disk to a location that the
   workstation can access while it is running Windows. For example,
   copy the file to the Windows directory (or copy the file to the
   workstation's hard disk, if the workstation has a hard disk).

2. Make sure that the workstation's path line includes both the drive
   and directory where RIPLMEM.EXE is located. Then, following the
   path line, insert a line that reads:

      RIPLMEM

   If you place the file on a network drive, make sure the workstation
   connects to the network before it attempts to start RIPLMEM.EXE.

3. Restart the workstation. RIPLMEM.EXE should start at this time.

4. Use the /3 switch to start Windows 3.00 in 386 enhanced mode on the
   workstation. For example:

      win /3

To use RIPLMEM.EXE properly:

-  Make sure RIPLMEM.EXE is on a drive that Windows can always gain
   access to. In other words, don't put the file on a drive that can
   be accessed only while the workstation is being started.

-  Do not move the RIPLMEM.EXE file while RIPLMEM is running. If you
   do, the program will be disabled, and you will need to restart the
   workstation to restart the program.