#
# Network device configuration
#
tristate 'Dummy net driver support' CONFIG_DUMMY
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Frame relay DLCI support (EXPERIMENTAL)' CONFIG_DLCI
  if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then
    int '  Max open DLCI' CONFIG_DLCI_COUNT 24
    int '  Max DLCI per device' CONFIG_DLCI_MAX 8
    dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
  fi
fi
tristate 'PLIP (parallel port) support' CONFIG_PLIP
tristate 'PPP (point-to-point) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
  comment 'CCP compressors for PPP are only built as modules.'
fi
tristate 'SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
fi
bool 'Radio network interfaces' CONFIG_NET_RADIO
if [ "$CONFIG_NET_RADIO" != "n" ]; then
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    tristate 'BAYCOM ser12 and par96 kiss emulation driver for AX.25' CONFIG_BAYCOM
  fi
  if [ "$CONFIG_AX25" = "y" ]; then
    bool 'Gracilis PackeTwin support' CONFIG_PT
    bool 'Ottawa PI and PI/2 support' CONFIG_PI
  fi
  tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP
  tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
  tristate 'WIC Radio IP bridge (EXPERIMENTAL)' CONFIG_WIC
  tristate 'Z8530 SCC kiss emulation driver for AX.25' CONFIG_SCC
fi
#
#	Ethernet
#
bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
  bool '3COM cards' CONFIG_NET_VENDOR_3COM
  if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
    tristate '3c501 support' CONFIG_EL1
    tristate '3c503 support' CONFIG_EL2
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate '3c505 support' CONFIG_ELPLUS
      tristate '3c507 support' CONFIG_EL16
    fi
    tristate '3c509/3c579 support' CONFIG_EL3
    tristate '3c590/3c900 series (592/595/597/900/905) "Vortex/Boomerang" support' CONFIG_VORTEX
  fi
  bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
  if [ "$CONFIG_LANCE" = "y" ]; then
    bool 'AMD PCInet32 (VLB and PCI) support' CONFIG_LANCE32
  fi  
  bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
  if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
    tristate 'WD80*3 support' CONFIG_WD80x3
    tristate 'SMC Ultra support' CONFIG_ULTRA
    tristate 'SMC Ultra32 support' CONFIG_ULTRA32
    tristate 'SMC 9194 support' CONFIG_SMC9194
  fi
  bool 'Other ISA cards' CONFIG_NET_ISA
  if [ "$CONFIG_NET_ISA" = "y" ]; then
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'AT1700 support (EXPERIMENTAL)' CONFIG_AT1700
    fi
    tristate 'Cabletron E21xx support' CONFIG_E2100
    tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
    tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3
    tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
      tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X
    fi
    tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
    tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
    tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
    fi
    tristate 'NE2000/NE1000 support' CONFIG_NE2000
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'NI5210 support' CONFIG_NI52
      tristate 'NI6510 support' CONFIG_NI65
    fi
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
    fi
    bool 'SK_G16 support' CONFIG_SK_G16
  fi
  bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
  if [ "$CONFIG_NET_EISA" = "y" ]; then
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200
    fi
    tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT
    tristate 'Intel EtherExpress/Pro 100B support' CONFIG_EEXPRESS_PRO100B
    tristate 'DE425, DE434, DE435, DE450, DE500 support' CONFIG_DE4X5
    tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP
    tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET
    fi
  fi
  bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
  if [ "$CONFIG_NET_POCKET" = "y" ]; then
    bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
    tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
    tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
  fi
fi

bool 'Token Ring driver support' CONFIG_TR
if [ "$CONFIG_TR" = "y" ]; then
  tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
fi
bool 'FDDI driver support' CONFIG_FDDI
if [ "$CONFIG_FDDI" = "y" ]; then
  bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX
fi
tristate 'ARCnet support' CONFIG_ARCNET
if [ "$CONFIG_ARCNET" != "n" ]; then
  bool '  Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH
  bool '  Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051
fi

