IMPORTANT PRINTER DRIVER INSTALLATION INSTRUCTIONS MICROSOFT WORD VERSION 5.5/6.0 HP LASERJET 4P PRINTER INSTALLING AND SELECTING A PRINTER DRIVER After you have used the DRIVER4P program to install your printer driver, you need to use the steps listed below to select and configure the printer driver. SELECTING AND CONFIGURING A PRINTER DRIVER To select the HP LaserJet 4P printer driver you installed with the DRIVER4P program, start Microsoft Word 5.5/6.0 and follow these steps: 1. Select the FILE menu. 2. Choose the PRINTER SETUP command. 3. Select HP4.PRD from the "Files" list box, then select "LaserJet 4P" in the "Printer Name" list box. 4. Select the following options: CONNECT TO - (specify the communications port your printer is using (for example, LPT1, LPT2, COM1, or COM2). PAPER FEED - (choose "Continuous" if you are using the printer's paper tray, or "Manual" if you are manually feeding a document). GRAPHICS RESOLUTION - (choose HPGL2). 5. Choose the OK button to save your selections and return to your document. MICROSOFT CORPORATION CUSTOMER SUPPORT Contact your Microsoft Dealer. Microsoft Word Version 5.5/6.0 1 NOTICE The information in this document is subject to change without notice. HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett- Packard shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material. Copyright (C) 1992 by HEWLETT-PACKARD COMPANY. Microsoft(R) is a registered trademark of Microsoft Corporation Microsoft Word Version 5.5/6.0 2