STANDARD MICROSYSTEMS CORPORATION

                        FTP PC/TCP v2.2 for DOS
                For TokenCard EliteSeries LAN Adapters

                          INSTALLATION GUIDE

     This software is licensed by SMC for use by its customers only.
          Copyright (c) 1993 Standard Microsystems Corporation.
                          All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the FTP PC/TCP version 2.2 for 
   DOS NDIS driver files from the SuperDisk to your PC.

o  How to prepare your PC's operating system so you can attach 
   to the network.

Note: This driver supports all SMC TokenCard EliteSeries 
      ISA and Micro Channel Token-Ring adapters.


COPYING THE DRIVER FILES

From the Driver Installation screen, select 'Copy Files' to copy all 
the files used by this driver from the SuperDisk to the Destination 
Directory recommended by EZStart, or to a different directory that 
you specify.


PREPARING YOUR OPERATING SYSTEM

1. Refer to Chapter 5 of the PC/TCP 2.2 Installation and 
   Configuration Guide, entitled "Using an NDIS Driver with the 
   Generic Kernel".

2. Copy the netbind files from the \NDIS subdirectory on FTP Disk A,
   labeled "Unsupported Network Software".

3. Using any text editor, add the following lines to your
   workstation's CONFIG.SYS file:

               device=c:\pctcp\protman.sys /i:c:\pctcp
               device=c:\pctcp\SMC8100.dos
               device=c:\pctcp\dis_pkt.gup

    Adjust the drive and path specifications to match your 
    installation.

4. Use any text editor to make the PROTOCOL.FTP file in the \PCTCP
   subdirectory on your PC's hard drive to look as follows:

    [Protocol Manager]
         Drivername = protman$

    [SMC8100_NIF]
           Drivername = SMC8100$

    [PKTDRV]
           Drivername = pktdrv$
           Bindings = SMC8100_nif
           Intvec = 0x60
           Chainvec = 0x65

5. Rename the PROTOCOL.FTP file to PROTOCOL.INI. Refer to your DOS
   manual if you need assistance.

6. Proceed with the rest of the instructions in the PC/TCP 2.2 
   Installation and Configuration Guide.


SMC and Standard Microsystems are registered trademarks; and 
TokenCard, TokenCard Elite, TokenCard Elite/A, Elite Series, 
EliteView, EZStart, and SuperDisk are trademarks of Standard 
Microsystems Corporation.  Other products and company names are 
registered trademarks or trademarks of their respective holders.