STANDARD MICROSYSTEMS CORPORATION

              IBM LAN Server v2.0 and v3.0 DOS Requester
                       For Ethernet LAN Adapters

                          INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the IBM LAN server DOS requester
   from the SuperDisk to your PC.

o  How to install the IBM LAN server DOS requester.


COPYING THE DRIVER FILES

From the EZStart Driver Installation screen, select 'Copy Files'
to copy all the files used by this driver from the SuperDisk to the
Destination Directory recommended by EZStart, or to a different
directory that you specify.

The EZStart default Destination Directory is a:\NDIS.  Please make 
a backup copy of your SuperDisk before EZStart copies files to the
SuperDisk to create and "option" diskette.


INSTALLING THE DRIVER

1. At the DOS prompt, insert the SMC or IBM LAN Support Program
   (LSP) Version 1.3x diskette into your PC's disk drive.

2. Type: DXMAID

3. Press the Enter key three times.

   The Environment Information screen appears.

4. Specify the following values for the fields on this screen 
   (if necessary, use the spacebar to change the options to the 
   settings shown below):

   For LSP v1.30 and 1.33:

    Configuration for this computer?                Yes
    Use existing configuration information?         No
    Do you have adapter option diskettes?           Yes
    Are you configuring for two adapters?           No

    Source for LSP                                  A:\
    Target for new configuration                    C:\LSP


   For LSP v1.35:

    Are you updating an existing configuration?     No
    Do you have driver diskettes:                   Yes

    Target for LSP:                                 C:\LSP
    CONFIG.SYS to update:                           C:\CONFIG.SYS
    AUTOEXEC.BAT to update:                         C:\AUTOEXEC.BAT

5. Press Enter to store your choices.

   The program prompts you to install the "option" diskette.

6. Install the SuperDisk in your source drive and specify the 
   path: A:\NDIS. Then press Enter.

   The necessary files are copied from the SuperDisk to your
   target directory on the hard disk.

7. LSP v1.30 and 1.33 users: Press Enter two times.

   LSP v1.35 users: Press Enter once.

8. Insert the LSP diskette and press Enter.

   The Current Configuration screen appears with the option for
   the SMC EtherEZ for DOS adapter and protocols already selected 
   ("IBM IEEE 802.2" and "IBM OS/2 NETBIOS").

9. Press F4. LSP is installed.

10. Use a text editor to specify at least 20 files in the 
    FILES= line of your CONFIG.SYS file; for example:

    files=20

11. Save the CONFIG.SYS file, then reboot your computer.

12. If you are using DOS v5.0 or later, type:

    SETVER CIP_MAIN.EXE 5.00

    at the DOS prompt and press Enter. Then reboot your system.

13. Insert the DOS LAN Requester Install Diskette.

14. Type: INSTALL

15. Press Enter three times.

    The program prompts you for the pathname of the DOS LAN 
    Requester directory. 

16. Specify the pathname for the DOS LAN Requester directory 
    (C:\DOSLAN is the default). Press Enter.

    The program asks which services you require.

17. Highlight either the "Send messages" or "Send, View, Edit, and
    Log messages" option. (Normally, you select the second option.)

18. Press Enter to confirm your choice.

19. Specify the workstation's ID and the domain ID. The domain ID
    must be the domain server ID and must be the same for all
    workstations on the network.

20. Follow the screen prompts to complete the installation.


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and EtherEZ,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, EliteSeries, EZStart, and SuperDisk are trademarks of 
Standard Microsystems Corporation.  Other product and company names 
are registered trademarks or trademarks of their respective holders.