This README file describes how to enable the RPL function on
workstations with a hard drive.  Two utilities, NDCRPLEN.EXE and
NDCRPLDS.EXE, are provided for enabling the RPL function on
workstations with hard drives.

To use your adapter's (ND1104/ND11x0/ND1111) RPL function and
boot your PC workstation from the network server, you must enable
the RPL function on the workstation by turning the hard disk (if
present in the workstation) into a non-bootable device. The
utility, NDCRPLEN.EXE, allows you to deactive your hard disk's
boot partition and enable the RPL function.  Another utility,
NDCRPLDS.EXE, allows you to re-activate your hard disk's boot
partition and disable the workstation's RPL function.

Note:
 * The NDCRPLDS.EXE program assumes your hard disk boot device to
be Drive C:.  If you don't use drive C: to boot your workstation
you must use the DOS FDISK.EXE command to activate your hard
disk's boot partition.
 * The NDCRPLEN.EXE and NDCRPLDS.EXE programs are in RPL
directory of this diskette.