Jan. 1995 INFOTEL IN-220P SERIES ETHERNET CARD Windows for Workgroups V3.11 Driver programs =============================================== ********************************************************** * README for Windows for Workgroups V3.11 Installation * ********************************************************** The IN220P Ethernet LAN drivers of IN-220P SERIES cards for Windows for Workgroups contained in this diskette are as follows: \WFW311\IN220P.386 NDIS 3.0 WFW driver for Windows for Workgroups \WFW311\IN220P.DOS NDIS 2.0 DOS driver for Windows for Workgroups \WFW311\IN220P.COM NetWare 3.X ODI driver for Windows for Workgroups \WFW311\NET.CFG NET.CFG file for Windows for Workgroups \WFW311\OEMSETUP.INF OEMSETUP file for Windows for Workgroups \DISK1 Installation Procedure: (1) When LAN drivers is installed, Windows for Workgroups will present a list of all available drivers. Since there will be no INFOTEL IN-220P SERIES drivers (IN220P.386, IN220P.DOS and IN220P.COM driver programs) initially, select UNLIST for 3rd party adapters not in the driver list. (2) Windows for Workgroups will ask for the drive/path containing the IN-220P SERIES Windows for Workgroups drivers. Insert the INFOTEL driver diskette in drive A: and respond with the following A:\WFW311 (3) Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the specified path. If you have entered the path name correctly, Windows for Workgroups should copy the appropriate drivers to the Windows for Workgroups system. (4) At this point, the driver would have been properly copied and the installation would proceed to the next step. Please refer to your Windows for Workgroups installation guide for correct procedures. (5) After the initial installation, the IN-220P SERIES drivers will be permanently copied to the Windows for Workgroups system. Subsequent network driver lists will already contain INFOTEL IN-220P SERIES drivers.