IBM LAN Server installation with NE2000 Compatible NDIS driver
        --------------------------------------------------------------
				     for
                        NIC-2002/UK series LAN Adapter




1.  DOS LAN REQUESTER
---------------------

  a. At the DOS prompt, insert the IBM LAN SupportProgram (LSP)
     Version 1.30 (or 1.31) Diskette into your disk drive. (A: or B: )

  b. Type 'DXMAID' at A:> prompt. Press ENTER.
     The IBM logo appears. Press ENTER.

  c. Press ENTER twice.

     The Environment Information screen appears.

  d. Specify the following values for the fields on this screen:


     ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ  Environment  Information  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
     ³                                                                  ³
     ³ Use the Space Bar to toggle between choices:                     ³
     ³                                                                  ³
     ³         Configuration for this computer?                Yes      ³
     ³         Use existing configuration information?         Yes      ³
     ³         Do you have adapter option diskettes?           Yes      ³
     ³         Are you configuring for two adapters?           No       ³
     ³         Do you need 802.2 interface support?            Yes      ³
     ³                                                                  ³
     ³ Type changes as needed to drive and directory information below: ³
     ³                                                                  ³
     ³         Source for LSP                                  A:\      ³
     ³         Target for new configuration                    C:\lsp   ³
     ³                                                                  ³
     ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

  e. Make sure the values are correct. Press ENTER to save your choices.

     Process Adapter Option Diskette screen appears.

  g. Insert the driver diskette in your source drive and specify the
     path: A:\NDIS (or b:\).  Press ENTER.

  g. The necessary files are copied from the Driver Disk to your
     target directory on the hard disk.

  g. Press ENTER three times.

  h. Insert the LSP diskette.  Press ENTER.

     The Current Configuration screen appears with the NE2000 Compatible
     ethernet adapter and protocols already selected ("IBM IEEE 802.2"
     and "IBM OS/2 NETBIOS").

  i. Press F4.  LSP is installed completely.

  j. Use a text editor to edit the CONFIG.SYS file. Specify at least
     20 files in the FILES= line, like this:

                files=20

      Once you have saved the CONFIG.SYS file, restart the computer.

  k. Insert the DOS LAN Requester Install Diskette 1.

  l. Type 'INSTALL'.  Press Enter.
     IBM logo appears, press Enter.

  m. Press ENTER two times.

      The program prompts you for the pathname of the DOS LAN
      Requester directory.

  n. Specify the pathname for the DOS LAN Requester directory.
      (C:\DOSLAN is the default.)  Press ENTER.

      The program asks you which services you require.

  o. Highlight either the "Send messages" or "Send, View, Edit, and
      Log messages" option.  (Normally, you select the second option.)
      Press ENTER to confirm your choice.

  p. Specify the machine's ID and the domain ID.  The domain ID must
      be the domain server ID and must be the same for all
      workstations on the network.

  q. Follow the prompts to complete the installation.


2.   OS/2 LAN Server
-----------------------

  a. Copy ETHNE.OS2 & UK000XO.NIF from a:\NDIS to c:\ibmcom\macs.

  b. Push "OS/2 LAN Service" icon.

  c. Push "Installation and configuration" icon.
     IBM logo appears.

  d. Press <ok>.

  e. Select <advanced>. Press Enter.

  f. Select "Install or Configure this Workstation".

  g. Select server type (add server or domain controller).
     "install or remove" appears.

  h. Select "Configure a component".

  i. Select "LAN Adapter and protocol support".

  j. Push "configure" button.

  k. Select "Configure workstation".

  l. Select "NE2000 Compatible ethernet adapter card" in Network Adapter
     dialog press <Add> button, and select 802.2 press <Add> IBM NetBIOS
     press <Add>, then press <OK>.

  m. Press <OK> four times.

  n. Press <ok> to backup old CONFIG.SYS & AUTOEXEC.BAT and create new
     CONFIG.SYS and AUTOEXEC.BAT.

  o. Restart the computer.