} Dec. 1994 D-Link PCMCIA Client Driver ============================= *********************************** NOTE *********************************** Each DE-650 series adapter comes with a driver diskette of its own. If you have more then one model of DE-650 adapter, make sure that you use the driver diskette that was included with the DE-650 adapter you are using. **************************************************************************** \IBMPC\INSTALL\DCD16.EXE DCD16.EXE is an integration version of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket Services v1.01, v2.0, v2.01, v2.10 Card Services v2.0, v2.01, v2.10. For more convenience, You can run the INSTALL.EXE which provided by the driver diskette in the a:\IBMPC\INSTALL.EXE to install all of the relative drivers ************** SOCKET SERVICE ************** The DCD16.EXE program is used to open I/O window mapping and IRQ of DE-650 PCMCIA Ethernet Card on which Socket Services(v1.01) or DATABOOK Socket and Cardtalk has been installed. To run DE-650 driver programs, DCD16.EXE must first be executed. The parameters of the DE-650 driver programs must match the hardware parameters settings of DCD16.EXE. These parameters can be I/O base and IRQ number. Note: IRQ parameter uses 5 or other except IRQ 9 because DATABOOK doesn't support IRQ 9. Two methods can be used to execute DCD16.EXE: Method 1 -------- From DOS prompt, A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2] Method 2 -------- In DOS config.sys DEVICE=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] Parameters are options. Their descriptions: /iop :I/O base /irq :IRQ number /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P2 :The selectable slot number. The default number is 1. Example: A>DCD16 /iop:320 /irq:5 /slt:1 ********************************** INTEL: PCIC 82365SL and compatible ********************************** This DCD16.EXE program is used to open I/O window mapping and IRQ of PCIC (82365SL) adapter for PCMCIA card. To run drivers of DE-650CT, DCD16.EXE must be executed first. The given parameters of DE-650 drivers must match the hardware parameters settings of DCD16.EXE. The parameters can be I/O base and IRQ value. Two methods could be used to execute DCD16.EXE. Method 1 -------- From a DOS prompt: A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2] Method 2 -------- From DOS config.sys: DEVICE=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] Parameter description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P2 :The selectable slot number. The default number is 1. Example: A>DCD16 /iop:300 /irq:5 /slt:1 ************** TOSHIBA: ICCNT ************** The DCD16.EXE program is used to open I/O window mapping and IRQ of ICCNT adapter for the PCMCIA Ethernet Card. To run drivers for DE-650CT, DCD16.EXE must be executed first. The parameters of DE-650 drivers must match the hardware parameters settings of DCD16.EXE. The parameters could be I/O base and IRQ value. Two methods can be used to execute DCD16.EXE: Method 1 -------- From a DOS prompt: A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2] Method 2 -------- From DOS config.sys: DEVICE=DCD16 [/iop:P0] [/irq:P1] [/slt:P2] Parameter description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P2 :The selectable slot number. The default number is 0. Example : A>DCD16 /iop:300 /irq:5 /slt:0 ******************************** D-Link Client Driver : DCD16.EXE ******************************** DCD16.EXE is an integration version client driver of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket services v1.01, v2.0, v2.01, v2.10, Card Services v2.0, v2.01, v2.10. Autodetection algorithm of DCD16.EXE for Card Services, Socket Services, and Adapters: 1. DCD16.EXE invoked as a client driver on Card Services. 2. DCD16.EXE invoked as a client driver on Socket Services. 3. DCD16.EXE invoked as a client driver on PCIC. 4. DCD16.EXE invoked as a client driver on ICCNT. 5. DCD16.EXE installation failure. Two methods can be used to execute DCD16.EXE: Method 1 -------- From DOS prompt, A>DCD16 [/irq:h] [/iop:hhh] [/slt:n] Example: A>DCD16 /irq:5 /iop:300 /slt:0 Method 2 -------- In DOS config.sys DEVICE=DCD16 [/irq:h] [/iop:hhh] [/slt:n] Example: DEVICE=DCD16 /irq:5 /iop:300 /slt:0 Parameters are options. Their descriptions: Usage : dcd16 [/irq:h] [/iop:hhh] [/slt:n] dcd16 [/hlp] dcd16 [/chk] /parameter: [h]ex;[n]umber;[w]word (range, interval, default) /irq:h (2-15,1,5) -- IRQ number. /iop:hhh (200-380,20,300) -- I/O base. /slt:n (0-?,1,0) -- Slot number. /? -- Help message. /chk -- List PCMCIA environment. ============================================= More explanations for parameters of DCD16.EXE ============================================= 1. Normal parameters for the Client driver base on Adapter or SS or CS: /irq:h (2-15,1,5) /iop:hhh (200-3FF,20,300) /slt:n (0-?,1,0) This parameter may be specified when client driver is invoked as either Adapter enabler or Socket Services enabler or Card Services enabler. In general, it was used by Adapter enabler. Sometime, it may be use when invoke as Socket Services or Card Services enabler. 3. Help and diagnostic parameter: /? -- For help. /chk -- For check and display the PCMCIA environment. ===================== = Compatible tested = ===================== PCM+ Card Services.(v2.00, v2.01, v2.10) PCM+ Socket Services.(v2.00, v2.01, v2.10) Systemsoft Card Services.(v2.00, v2.01, v2.10) Systemsoft Socket Services.(v2.00, v2.01, v2.10) Award on Zenith SystemsLite machine.(same as Ventura) Ventura Micro Card Services (v2.00, v2.01, v2.10) on Zenith SystemsLite. Ventura Micro Socket Services.(v2.00, v2.01, v2.10) AMI Socket Services.(v1.01) IBM Socket Services (v1.01, v2.0) on IBM ThinkPad 720. IBM Socket Services v1.01 on IBM ThinkPad 710. IBM Card Services v2.0 on IBM ThinkPad 720. Databook CardTalk Socket Services. (v1.01) Intel PCIC adapter. Toshiba ICCNT adapter. *************************************** SystemSoft installation With DE-650CT *************************************** [Preface] SystemSoft is a company that develop the PCMCIA drivers, like Socket Service, Card Service and Card Installation Client drivers. Now, they had provided drivers that support the Intel 82365SL PCMCIA and Databook TCIC-2/N controller chips... etc. How SystemSoft's drivers work with DE-650CT ? *** For Cardsoft v2.x, v3.0 and the client driver is CARDID.EXE 1. Install SystemSoft Cardsoft into your system. 2. Copy DLINK.CLB which is in the \IBMPC\INSTALL\CARDSOFT to CARDSOFT which installed by you. 3. ADD one statement into CARDID.INI at the end. Please see as the following. : : : : [Libraries] Changed => [Libraries] CardLib=CARDID.CLB CardLib=DLINK.CLB <----- New added : CardLib=CARDID.CLB : : 4. Re-boot your system. 5. Install Network MAC driver. 6. This DLINK.CLB can use for DE-650C, DE-650T and the newest DE-650CT. *** For CardSoft v3.1 1. Install SystemSoft CardSoft v3.1 into your system. 2. Update DLINK.CLB that provided by DE-650 driver diskette. 3. Reboot your system. ************************************ Phoenix installation With DE-650CT ************************************ Phoenix is a company that develop the PCMCIA drivers, like Socket Service, Card Service and Card Installation Client drivers. Now, they had provided drivers that support the Intel 82365SL PCMCIA and Databook TCIC-2/N controller chips...etc. How Phoenix PCM Plus v.22 PCMCIA software work with DE-650CT ? 1. Install Phoenix PCM Plus v2.22 into your system. 2. Replace PCMSCD.EXE by PCMSCD.NEW. PCMSCD.NEW is in the \IBMPC\INSTALL\PCMP\PCMSCD.NEW of the DE-650 driver diskette. 3. Re-boot your system. 4. Install Network MAC driver 5. This PCMSCD.NEW just uses for DE-650CT. How Phoenix PCM Plus v3.x PCMCIA software work with DE-650CT? Method 1: 1. Install Phoenix PCM Plus v3.x into PC system 2. Insert DE-650CT/T/AUI into PCMCIA slot 3. Execute PCM.EXE that supported by Phoenix PCM Plus 3.x 4. Choose Configure item by ALT-C. 5. Choose Add Card to List item and Enter 6. Exit PCM.EXE by Alt-V 7. Reboot Method 2: 1. Install Phoenix PCM Plus v3.x into PC system 2. Modify Config.SYS as follow: : : device=c:\...\EMM386.EXE x=c800-c8ff x=c900-ccff device=c:\...\PCMSS.EXE device=c:\...\PCMCS.EXE device=c:\...\PCMSCD.EXE DEVICE=C:\...\DCD16.EXE <======== added this line : 3. Reboot