MAR. 1994
		   PC-NFS Driver Installation
			      for
	       D-Link DE-650 PCMCIA Ethernet Adapter
	   ===========================================


The D-Link PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS
on your PC with the D-Link DE-650 PCMCIA Ethernet Adapter.

The following files will be used in this installation:

Files		Contents
-----------	----------------------------------------------------------
PDNFS.SYS	PC-NFS Driver Program
NEC65PD.SYS	Packet driver program for DE-650 PCMCIA card
NEC65PD.COM	Packet driver program for DE-650 PCMCIA card

Two methods can be used to install:

METHOD 1:

1. Install the PC-NFS program according to the procedure described in the
   PC-NFS manual.  On the screen of the PC-NFS install program, select 3C501
   (the 3Com EtherLink card) as your network interface card. When the screens
   prompt you, select 5 for the interrupt level (IRQ), and select 300h for
   the base I/O address.

2. Copy the following files to the \NFS directory of your hard
   disk:

     PDNFS.SYS
     NEC65PD.SYS
     NEC65PD.COM
     A:\NECPC\ISNTALL\*.*

3. Modify the CONFIG.SYS file as follows:

   DEVICE=C:\ANSI.SYS
   DEVICE=C:\NFS\PCNFS.SYS /m
   DEVICE=C:\NFS\SOCKDRV.SYS
   DEVICE=C:\NFS\NCD.EXE      <----- PCMCIA Enabler
   DEVICE= C:\NFS\NEC65PD.SYS [-d] [-w] <sw_int> <irq> <io_addr> <m_base>
   DEVICE=C:\NFS\PDNFS.SYS
   LASTDRIVE=V

Note:
    Before run packet driver, run PCMCIA initial program on A:\NECPC\INSTALL
    directory.
    Please see as following:


      *** PC installed NEC PCMCIA S/W ***
  NCD.EXE  [/iop:P0] [/mem:P1] [/irq:P2] [/slt:P3]

 [ Parameters for INSTALL utility ]
NCD.EXE
    NCD.EXE is an open adapter utility.
    NCD.EXE supports NEC 9821 notebook.

For more detail information, please refer to \NECPC\INSTALL.DOC.

  NCD.EXE  [/iop:P0] [/mem:P1] [/irq:P2] [/slt:P3]

   Parameter description:
	/iop   :I/O base
	/mem   :Attribute memory base
	/irq   :IRQ value
	/slt   :Slot type

	P0 :The selectable window I/O base with 0x20 range.
	    The default value is 0x300.
	P1 :The selectable window memory base.
	    The default value is 0xd000.
	P2 :The selectable irq value.
	    The default value is 0x5.
	P3 :The selectable slot number.
	    The default value is 0x0.

     AUTOEXEC.BAT file:

     SET PATH = C:\; C:\NFS
     SET TZ=EST5EDT
     SET NFSDRIVE = C
     NET YPDOMAIN ypserver
     NET START RDR
     NET YPSET homer
     NET NAME john
     NET USER F: \\user\john

       We use the name "john" here as an example.

4. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.


METHOD 2:

1. Install the PC-NFS program according to the procedure described in the
   PC-NFS manual.  On the screen of the PC-NFS install program, select 3C501
   (the 3Com EtherLink card) as your network interface card. When the screens
   prompt you, select 9 for the interrupt level (IRQ), and select 300h for
   the base I/O address.

2. Copy the following files to the \NFS directory of your hard
   disk:

     PDNFS.SYS
     NEC65PD.SYS
     NEC65PD.COM
     A:\INSTALL\*.*

3. Modify the CONFIG.SYS file as follows:

	DEVICE=C:\ANSI.SYS
	DEVICE=C:\NFS\PCNFS.SYS /m
	DEVICE=C:\NFS\SOCKDRV.SYS
	DEVICE=C:\NFS\PDNFS.SYS
	LASTDRIVE=V

     AUTOEXEC.BAT file:

	SET PATH = C:\; C:\NFS
	SET TZ=EST5EDT
	SET NFSDRIVE = C
	NCD.EXE      <------PCMCIA initial program
	NEC65PD [-d] [-w] <sw_int> <irq> <io_addr> <m_base>
	NET YPDOMAIN ypserver
	NET START RDR
	NET YPSET homer
	NET NAME john
	NET USER F: \\user\john

       We use the name "john" here as an example.

Note:
    Before run NEC65PD, run PCMCIA initial program on A:\NECPC\INSTALL
    directory.
    Please see as following:

      *** PC installed NEC PCMCIA S/W ***
  NCD.EXE [/iop:P0] [/mem:P1] [/irq:P2] [/slt:P3]

  Please refer to \necpc\install.doc for detail information.

  [ Parameters for INSTALL utility ]
NCD.EXE
    NCD.EXE is an open adapter utility.
    NCD.EXE supports NEC 9821 notebook.

   device=ncd.exe [/iop:P0] [/mem:P1] [/irq:P2] [/slt:P3]

   Parameter description:
	/iop   :I/O base
	/mem   :Attribute memory base
	/irq   :IRQ value
	/slt   :Slot type

	P0 :The selectable window I/O base with 0x20 range.
	    The default value is 0x300.
	P1 :The selectable window memory base.
	    The default value is 0xd000.
	P2 :The selectable irq value.
	    The default value is 0x5.
	P3 :The selectable slot number.
	    The default value is 0.

4. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.


Notes:

[-d]		Delay Initial - The driver program will not initialize
		the network interface card until the packet driver program
		is accessed by its upper layer program first time.
[-w]		the -w parameter is for use with the Windows environment only.
<sw_int>	is the software interrupt vector number used by the packet
		driver program, which can be from 96 to 128.
<irq>		is the hardware interrupt (IRQ) line set on your network
		interface card. The default is 5 if this parameter is not
		specified.
<io_addr>	is base I/O address set on your network interface card.
		The default address of 0x300 is used, if this parameter
		is not specified.
<m_base>	is attribute memory base. The default value is 0xd000.