MAR. 1994
		    NetWare Driver Installation
		    ===========================

The NetWare driver programs on this diskette are for use with the
D-Link DE-650 PCMCIA Ethernet Card.

This diskette is labeled as LAN_DRV_DLK and the files are organized as follows:

Directory		    Contents
--------------		    --------------------------------------------------------
\NECPC\NETWARE		    A pre-generated IPXnec65.COM
\NECPC\NETWARE\ODI.DOS	    ODI workstation driver for DOS

*********************************
*  QUICK SETUP FOR WORKSTATION	*
*********************************

A pre-generated workstation driver IPXNEC65.COM is included on
this diskette.	You can simply run the IPXNEC65 on a workstation
to access the Novell network:

     >IPXNEC65	  --Supports NetWare Lite, 2.1x, 2.2 or NetWare 386.
     >NETx	  --This program is provided by Novell.


************************
*  NETWARE LITE USERS  *
************************

1)  Follow the normal installation procedure as instructed by NetWare Lite.
    When asked to select a network driver, simply choose "NOVELL NE2000".

2)  After the installation is completed, modify the STARTNET.BAT file as
follows:

	From:
       ---------------------------
	     LSL
	     NE2000
	     IPXODI A
	     CLIENT

	To:
       ----------------
	     NCD
	     LSL
	     NEC65ODI
	     IPXODI
	     CLIENT


    NCD.EXE
	NCD.EXE is an open adapter utility.
	NCD.EXE supports NEC 9821 notebook.

For more detail information, please refer to \NECPC\INSTALL.DOC.



 3) Copy \NECPC\NETWARE\ODI.DOS\NET.CFG file to NWLITE sub-directory which was
    created when you installed NetWare Lite.

 4) You may now run STARTNET to access the NetWare network.

**********************
*  ODI DRIVER SETUP  *
**********************

ODI Workstation for DOS
=======================
D-Link ODI Driver program allows you to run multiple protocl stacks.  It also
allows you to install up to two network adapters in a workstation. D-Link ODI
driver supports "port, node address, protocol and frame" options.  You can use
these options to create your own NET.CFG file.	For detailed info on Keywords,
please refer to Novell's manual "NetWare ODI shell for DOS - NET.CFG options".

1)  Copy the NEC65ODI.COM file (from this diskette) to the directory which
    contains Novell's LSL.COM, IPXODI.COM and NETx.COM files.

2)  Follow Novell's instructions on using the ODI programs. You can substitute
    the NEC65ODI.COM whenever a reference is made to the Hardware Specific
    Module.

3)  A typical startup for ODI workstation is as follows:

     >NCD		--Enable PCMCIA Adapter
     >LSL		--Link Support Layer Module provided by Novell
     >NEC65ODI		--Hardware Specific Module provided by D-Link
     >IPXODI		--IPX Protocol Stack Module provided by Novell
     >NETx		--DOS Support Module provided by Novell
     >LOGIN

    NCD.EXE
	NCD.EXE is an open adapter utility.
	NCD.EXE supports NEC 9821 notebook.

   For more detail information, please refer to \necpc\install.doc.

   >NCD [/iop:P0] [/mem:P1] [/irq:P2] [/slt:P4]

   Parameter description:
	/iop   :I/O base
	/mem   :Attribute memory base
	/irq   :IRQ value
	/slt   :Slot type

	P0 :The selectable window I/O base with 0x20 range.
	    The default value is 0x300.
	P1 :The selectable window memory base.
	    The default value is 0xd000.
	P2 :The selectable irq value.
	    The default value is 0x5.
	P3 :The selectable slot number.
	    The default value is 0x0.