Windows NT 3.1

   Installing driver:      ( Location of Driver:     \WINNT31\ESL835.SYS )

   1. In the Main group of NT, select the "Control Panel" -> " Network "
      -> " Add Adapter " -> "<other> Requires disk from manufacturer" .

   2. Insert the ESL835 driver disk in drive A, enter drive and pathname
       A:\WINNT31 which is the path where the driver ESL835.SYS and setup
       file OEMSETUP.INF are located, and then choose the OK button.

   3. The screen will appear "Input EthernetID" dialog box which is provide
      by ESL835.SYS driver. This option is only required when you have more
      than one ENCORE ESL835 PCI LAN adapters on this computer.   Select
      SKIP if only one adapter is installed on this computer.

   4. NT will then perform the binding process.  If any additional network
      software options were installed,  you may be  prompted for  specific
      information for these packages.

   5. Restarting your system you will acquire network service.

   NOTES:
   ------
      1. Installing Multiple LAN Adapters:
         Enter Windows NT and follow above setup procedure step 2,in the
         "Network Settings" dialog box, choose the "Configure.." button.
         The "Input Ethernet ID"  dialog box appears and input adapter's
         Ethernet ID. Last step to select OK and close NETWORK SETUP.
         Select SKIP if only one adapter is installed on this computer.

      2. If you are install ENCORE ESL835 in Windows NT at first time.
         To use the mini-port driver(ESL835.SYS ) on WINDOWS NT 3.1 ,
         you must replace the original  system NDIS.SYS file with the
         A:\WINNT31\NDIS.SYS  file included in this directory.

         For example:

                > cd c:\winnt\system32\drivers
                > copy a:\winnt31\ndis.sys

            or

                > cd c:\winnt\system32\drivers
                > rename ndis.sys ndis.bak
                > copy a:\winnt31\ndis.sys