E2000plus-series Ethernet Adapters
Installation file for
\WIN95 directory
============================================================================


******************************************
*  Driver Installation for Windows 95    *
******************************************

The driver for Windows 95 is located in the \WIN95 directory of the
E2000plus driver diskette.

PnP MODE --

1. Start Windows 95.

2. When the "New Hardware Found" window appears, move the pointer to
   "Driver from disk provided by hardware manufacturer", and then
   press "OK".

3. The "Install From Disk" window will appear. In the box indicating
   the drive and path where the driver is stored, key in "A:\WIN95"
   (assuming this diskette is in drive A).

4. After the driver information appears, select
   "E2000plus series PnP Ethernet Adapter".

5. When the "Insert disk" window appears, choose "OK" and then choose
   the correct path to load *.dll files, e.g. C:\WIN95.

6. When the "System Setting Change" window appears, the installation
   is done. Remove your installation disk, push "YES" to restart
   Windows 95, and the driver will be functional.

-------------------------------------------------------------------------------
JUMPERLESS MODE --

1. From the Windows 95 main screen, click on the "My Computer" icon.
   Choose the "Control Panel" subwindow, and then the "Network"
   icon to install the network driver.

2. In the Network box, select the "Add" button.

3. Now, the "Select Network Component Type" window shows four options:
   "Client", "Adapter", "Protocol", and "Service".
   Choose "Adapter". The "Select Network Adapter" window appears.

4. In the "Manufacturers" box, highlight "[detect net driver]".
   Then click the "Have Disk ..." button.

5. There is a box to input the drive and path the driver is located.
   Key in "A:\WIN95" (assuming this diskette is in drive A).

6. After the driver information appears, select
   "E2000plus series PnP Ethernet Adapter".

7. Return to the "Network" window. Highlight the selected driver, and
   press the "Properties ..." button which includes "Driver Type",
   "Bindings", and "Resources". Choose "Resources" and enter the
   correct values for "Interrupt [IRQ]" and "I/O address range". These
   values can be found from the "Adapter Configuration" feature of the
   SETUP program.

8. Push the "OK" button in the "Network" window and Windows 95 will
   construct the driver configuration. When the "Insert disk" window appears,
   push the OK button and then choose a correct path to restore *.dll
   files, i.e. C:\WIN95.

9. After the "System settings change" window appears, the installation
   is done. Select "YES" to restart Windows 95, and the driver will
   be functional.