Congratulations, you have successfully extracted the driver files into the C:\S3drv directory or the directory of your choice. This directory also contains a backup copy of the installation instructions. You are now ready to start the installation process. Please follow the steps below:   



1.  Restart your system.

2.  IMPORTANT: When the "Please select the operating system to start..." message is displayed, select "Windows NT Workstation     Version 4.00 [VGA mode]".

3.  From "Start", select the "Settings group", then click on the "Control Panel" icon.

4.  In the "Control Panel", double click on the "Display" icon.

5.  In the "Settings" screen, click on the "Display Type..." button.

6.  From the "Display Type" screen, in the "Adapter Type" section, click on the "Change..." button.

7.  In the "Change Display" screen, click on the "Have Disk..." button.

8.  If you extracted the files to a floppy disk, make sure it is inserted.  By default Windows checks the A:\ drive first. If the files have been extracted to the C:\S3drv directory or another directory on your hard drive, click "Browse" button. In the "Open"    window browse your way to the directory on your hard drive where the driver files reside and press OK

9.  From the list of displayed S3 devices, select your S3 device.

10. From the "Third-party Drivers" window, click on the "Yes" button to proceed.

11. If a message appears stating that the driver is already installed on the system and asks if you want to use the current or new drivers, be sure to select the "New" button.

12. If prompted for the driver diskette a second time, click on the "Continue" button.

13.  When the message "The drivers were successfully installed" is displayed, click on the "OK" button.

14.  At the "Display Type" window, click on the "Close" button. 

15.  At the "Display Properties" window, click on the "Close" button.

16. When you see the "System Settings Change" window, asking if you wish to restart your computer, click on the "Yes" button to reboot. The installation process is now complete.