©Copyright 2003-2004 Marvell®.
All rights reserved.
SetupYukonWin.htm created 19-Nov-2004
Readme File for SETUPYUKONWIN.exe v7.24.2.3
Supporting: Marvell Yukon Gigabit Ethernet Controller
Operating Systems:
Windows NT 4.0, Windows 98 SE, Windows Me, Windows 2000,
Windows XP, Windows Server 2003
This file contains
The driver installation package contains the Marvell
NDIS Miniport Driver for the Marvell Yukon Gigabit
Ethernet Controller.
This README file explains how to install the driver
installation package on a machine running one of the
following operating systems:
Windows NT 4.0, Windows 98 SE, Windows Me, Windows 2000,
Windows XP, Windows Server 2003
To install the driver, the following file is required:
SetupYukonWin.exe
On plug & play Windows versions the adapter is found,
identified and configured automatically. Cancel all
operating system attempts to install the driver
automatically.
NOTE: To install the driver you have to be logged in as
a user with administrative rights.
To install the driver, proceed as follows:
1. Execute the setup file "SetupYukonWin.exe".
2. Follow the instructions displayed during the
installation procedure.
NOTE: Silent installation is not supported for
Windows NT 4.0.
In order to install the driver silently the following
commands should be executed.
4.1 Driver Installation
SetupYukonWin.exe /S /V"/LIME %WINDIR%\YukonInstall.log
REBOOT=ReallySuppress /qn"
4.2 Driver Removal
SetupYukonWin.exe /S /V"/LIME %WINDIR%\YukonInstall.log
REMOVE=ALL REBOOT=ReallySuppress /qn"
4.3 Driver Repair
SetupYukonWin.exe /S /V"/LIME %WINDIR%\YukonInstall.log
REINSTALLMODE=vomus REINSTALL=ALL REBOOT=ReallySuppress
/qn"
NOTE: On Windows 98 SE and Windows Me it is recommended
to use "REBOOT=Force" instead of
"REBOOT=ReallySupress" because each driver
installation needs a reboot for completion.
4.4 Further Options
By default the installation directory is
"%PROGRAMFILES%\Marvell\Miniport Driver". It can be
changed by setting the variable "INSTALLDIR".
Example :
SetupYukonWin.exe /S /V"/LIME %WINDIR%\YukonInstall.log
INSTALLDIR=C:\MyDir REBOOT=ReallySuppress /qn"
The installation status is logged in the file
"%WINDIR%\YukonInstall.log". The log file path and name
can be changed by replacing "%WINDIR%\YukonInstall.log"
with the preferred file path and name.
If you should encounter any problems with your driver
installation package, please re-read the instructions
above and the documentation supplied with the operating
system carefully.
Additionally refer to your system event log file (using
the Event Viewer) and check it for entries from the
Marvell NDIS Miniport Driver. If your particular problem
is not listed or the error persists, please send your
system event log file to our technical support.
For further information please contact our support.
*** End of Readme File ***