©Copyright 2003 Marvell®.
All rights reserved

SetupVCTwin.htm created 19-Nov-2003

Readme File for SETUPVCTWIN.exe v1.04
Marvell Yukon Gigabit Ethernet Adapter Family

This file contains 






	
		1  Overview
	



The Virtual Cable Tester(TM) installation package 
contains the Marvell Virtual Cable Tester(TM) 
application. 

This README file explains how to install the Virtual 
Cable Tester(TM) Package on a machine running Windows 
2000 or Windows XP. 


NOTE:
   The Marvell Virtual Cable Tester(TM) can only be used 
with Windows 2000 and Windows XP. 







	
		2  Required Files
	



To install the Marvell Virtual Cable Tester(TM), the 
following file is required: 

    SetupVCTwin.exe






	
		3  Installation Instructions
	




NOTE:
   To install the Marvell Virtual Cable Tester(TM) make 
sure that you are logged in as a user with administrative 
rights. 

To install the Marvell Virtual Cable Tester(TM), proceed 
as follows: 

1. Execute the setup file SetupVCTwin.exe . 

2. Follow the instructions of the installation procedure. 






	
		4  Troubleshooting
	



If you should encounter any problems with your Marvell 
Virtual Cable Tester(TM) Package, please re-read the 
instructions above and the documentation supplied with 
the operating system carefully. 
Additionally refer to your system event log file (using 
the Event Viewer) and check it for entries from Marvell 
Virtual Cable Tester(TM). 

If your particular problem is not listed or the error 
persists, please send your system event log file or at 
least the event id number and the logging data (as WORDs) 
of the entries made by Marvell Virtual Cable Tester(TM) 
to our technical support. 

For further information please contact support.
*** End of Readme File ***