(C)Copyright 2003 Marvell(R). All rights reserved =========================================================================== SetupYukonWin.txt created 25-Nov-2003 Readme File for SETUPYUKONWIN.exe v6.28 Marvell Gigabit Ethernet Adapter Family This file contains 1 Overview 2 Required Files 3 Installation Instructions 4 Troubleshooting =========================================================================== 1 Overview =========== The Miniport Driver installation package contains the Marvell 32-bit Miniport driver for the Marvell Gigabit Ethernet Adapter Family. This README file explains how to install the Miniport Driver Package on a machine running Windows 98 SE, Windows ME, Windows NT 4.0, Windows 2000 and Windows XP. 2 Required Files ================= To install the Miniport Driver, the following file is required: SetupYukonWin.exe 3 Installation Instructions ============================ With PCI adapters, due to the plug & play facility of PCI, Windows is able to find, identify and configure the adapter automatically. Cancel all the operating system attempts to install the drive automatically. NOTE: To install the driver make sure that you are logged in as a user with administrative rights. To install the Miniport Driver, proceed as follows: 1. Execute the setup file SetupYukonWin.exe . 2. Follow the instructions of the installation procedure. 4 Troubleshooting ================== If you should encounter any problems with your Miniport Driver Package, please re-read the instructions above and the documentation supplied with the operating system carefully. Additionally refer to your system event log file (using the Event Viewer) and check it for entries from Marvell Miniport Driver. If your particular problem is not listed or the error persists, please send your system event log file or at least the event id number and the logging data (as WORDs) of the entries made by Marvell Miniport Driver to our technical support. For further information please contact support. *** End of Readme File ***