©Copyright 2003 Marvell®.
All rights reserved
SetupYukonWin.htm created 25-Nov-2003
Readme File for SETUPYUKONWIN.exe v6.28
Marvell Gigabit Ethernet Adapter Family
This file contains
The Miniport Driver installation package contains the Marvell 32-bit
Miniport driver for the Marvell Gigabit Ethernet Adapter Family.
This README file explains how to install the Miniport Driver Package on a
machine running Windows 98 SE, Windows ME, Windows NT 4.0, Windows 2000
and Windows XP.
To install the Miniport Driver, the following file is required:
SetupYukonWin.exe
With PCI adapters, due to the plug & play facility of PCI, Windows is
able to find, identify and configure the adapter automatically. Cancel
all the operating system attempts to install the drive automatically.
NOTE:
To install the driver make sure that you are logged in as a user with
administrative rights.
To install the Miniport Driver, proceed as follows:
1. Execute the setup file SetupYukonWin.exe .
2. Follow the instructions of the installation procedure.
If you should encounter any problems with your Miniport Driver Package,
please re-read the instructions above and the documentation supplied with
the operating system carefully.
Additionally refer to your system event log file (using the Event Viewer)
and check it for entries from Marvell Miniport Driver.
If your particular problem is not listed or the error persists, please
send your system event log file or at least the event id number and the
logging data (as WORDs) of the entries made by Marvell Miniport Driver to our
technical support.
For further information please contact support.
*** End of Readme File ***