ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³              Installation for LAN Server DOS LAN Service               ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

   A. Please follow the procedure below to setup LAN Server DOS LAN Service:

      1. When installation program asks for a network drivers,
         select "Network card not shown in below".
      2. Insert 940PCI Drivers diskette into driver A:
      3. Type "A:\NDIS2\LANSVR.DOS" and press <Enter>
      4. Follow the direction to finish the setup procedure.

  B. Trouble Shooting

     1. Message: "!! No W89C940 card detected"
        Solution: Make sure that your W89C940 card is plugged steadily.

     2. Message: "!! No free W89C940 card"
        Solution: One driver for one card. Make sure that there is less
                  drivers loaded than card plugged. If option keyword
                  SelectedID is assigned, make sure that all node ID's
                  assigned is correct or let drivers without SelectedID be
                  loaded after those with SelectedID.

     3. Message: "!! Cannot open PROTMAN$"
        Solution: Make sure that PROTMAN.DOS is loaded before 940-ND.DOS,
                  and it is initialized successfully. If the syntax of
                  PROTOCOL.INI is incorrect, PROTMAN$ cannot be loaded.

     4. Message: "!! Bad Parameter in PROTOCOL.INI"
        Solution: The parameter is invalid. For example, the correct
                  SelectedID format need two single quotation signs (').
                  If you fail to do it, this message will be shown.

     5. Message: "!! Unknown Keyword in PROTOCOL.INI"
        Solution: 940-ND only accepts two keywords: DRIVERNAME and SELECTED.
                  Other keywords are unknown. Notice that, PCI bus need not
                  assign IOBASE and INTERRUPT.

     6. Message: "!! Specified NODEID is absent or bound"
        Solution: You specified a NODE ID at keyword SelectedID, and this
                  ID is bound by another drivers or can not be found. Make
                  sure that the ID is correct.

  * Version Release

    1.04 11-15-1995 This is the first revision of 940-ND.DOS 2.0.1 MAC Driver.