W940ND.SYS

                    Winbond Electronics Corporation


Description:

  1. W940ND.SYS is a NDIS 3.x driver for both Windows 95 Final Release
     Platform.

     If there is only one 940 card, the driver will automatically get IOBASE
     and IRQ from PCI Configuration Space.

     If there is more than oen 940 card, user can indicate a specified 940 card
     by inputing IDs.

     If user does not input an ID to select a specified 940 card, this driver
     will automatically select a free 940 card to load.

  2. W940ND.INF is a Network Setup Information File for Windows 95 Platforms.

  3. In Win95 OSR2 environment (version 4.00.950.B), the vendor ID and
     the device ID in PCI configuration space of the 940 card need to be
     the same as the W940ND.INF file described.
     for example :
     below line in W940ND.INF
        %w89c940.DeviceDesc%=w89c940.ndi, PCI\VEN_1050&DEV_0940
     describes that the vendor ID = 0x1050 and device ID = 0x0940.


Installation:

  1. Plug Winbond W89C940 card into one of the PCI slots of your PC.

  2. Turn power on then boot from Windows 95.

  3. If Windows 95 prompts PCI Ethernet Controller in New Hardware Found
     dialog box, then please follow below steps to install driver :

     3.1 Select "Driver from disk provided by hardware manufacturer" from New
         Hardware Found dialog box, then click OK button.
     3.2 Type the path name that contains W940ND.SYS and W940ND.INF files and
         click the 'OK' button.
     3.3 When the 'Winbond W89C940 PCI Ethernet Adapter' dialog box appears,
         press <Enter>.
     3.4 Follow screen instructions to complete the process.

  4. If Windows 95 does not prompt PCI Ethernet Controller in New Hardware
     Found dialog box, then please follow below steps to install driver :

     4.1 Click the 'Network' Icon in the Control Panel Group.
     4.2 Click the 'Add' button in the 'Network' Dialog Box.
     4.3 Select the 'Adapter' item and click the 'Add' button in the 'Select
         Network Component' Dialog Box.
     4.4 Click the 'Have Disk' button in the 'Select Network adapters' Dialog
         Box.
     4.5 Type the path name that contains W940ND.SYS and W940ND.INF files and
         click the 'OK' button.
     4.6 When the 'Winbond W89C940 PCI Ethernet Adapter' dialog box appears,
         press <Enter>.
     4.7 Follow screen instructions to complete the process.

  5. If more than one 940 card is installed on your computer, select a
     specified 940 card by inputing Ethernet ID.
     Method :
     Click the "Control Panel" icon from My Computer window.
     Select the 'Winbond W89C940 PCI Ethernet Adapter' item in the 'Network'
     Dialog Box.
     Click the 'Advanced' button.
     Select the 'Selected Etherent ID' item.
     Type the Ethernet ID.
     Click the 'OK' button.

  6. Restart your computer.


Use:

  1. Boot your computer,

  2. If more than one 940 card is installed on your computer, select a
     specified 940 card to load (refer to step 5 in the Installation
     section).


Trouble Shooting:

  1. Message: 'Your network adapter Winbond W89C940 PCI Ethernet Adapter[0000]
               is not working properly. You may need to set it up again.
               For more information, see the Network Troubleshooter in Windows
               Help.'
     Solution: Make sure that your W89C940 card is plugged into your system.

  2. Condition: The Windows 95 argues resource conflicts.
     Solution: Try to change the PCI slot of 940 card such that it may be
               assigned other resource.


Histories of Release:

    ***) 1.00,  11-17-1995
         First release.

    ***) 1.10,  02-26-1996

    ***) 1.20,  09-18-1996
         When there are more than one 940 cards in the system,
         if user does not input an ID to select a specified 940 card, this
         driver will automatically select a 940 card to load.

    ***) 1.30,  10-04-1996
         When there are more than one 940 cards in the system,
         if user does not input an ID to select a specified 940 card, this
         driver will automatically select a free 940 card to load.

    ***) 1.40,  12-03-1996

    ***) 1.50,  02-20-1997
         1. modify INF file for OSR2.
         2. for passing Win95 logo test.

    ***) 2.00,   12-17-1997
         Pass the NDISTEST.