SCO UNIX 5.X

   Instroduction:
   --------------
       This document describes the procedure to install the SCO UNIX driver
       for PCI Ethernet adatper.

   Location of Driver:     \SCO\5X\DRIVER.O
   ------------------

   The following files will be used in this installation:
   -----------    -----------------------------------------
   Driver.o       RTL 8029 MDI Driver Program
   setup          Transfer dos format to unix format setup program
   Master         Used by netconfig
   System         Used by netconfig
   Node           Used by netconfig
   Space.c        Used by netconfig
   space.h        Used by netconfig
   lkcfg          Used by netconfig
   AOF/r3e        Used by netconfig


   Installing driver procedure on SCO UNIX 4.x:
   -------------------------------------------
      1.  Installation Diskette in DOS format.
          Put RTL SCO UNIX Driver diskette to floppy A: and use doscp
          command to copy RTL SCO UNIX PCI Driver into UNIX's directories.

             # cd /
             # doscp A:setup  /setup
             # chmod +x /setup
             # ./setup


      2.     Use netconfig utility

             Avaiable options:

             # netconfig

      3.  To add adapters, select "Add New Lan Adapter" from "Hardware".

      4.  Add Protocol to select SCO TCP/IP.

      5.  Enter the internet Address of this interface      n.n.n.n

      6.  Enter the netmask for this interface
          (default 255.255.255.0)

      7.  Enter the boardcast address for this interface
          default: n.n.n.n

      8.  Do you want to relink to kernel now ?               y

      9.  Do you want this kernel to boot by default (y/n)    y

      10. Do you want the kernel environment rebuilt (y/n)    y

      11. Reboot unix

              # shutdown -y -g0