******************************************************************
 *  Genius GF100TXRIII PCI Fast Ethernet Card WINNT 3.5x Driver   *
 ******************************************************************


Introduction
============
    This document describes the procedure to install Windows NT 3.5x
    driver for GF100TXRIII PCI Fast Ethernet Adapter.


Installation Procedures
=======================

    1. If Windows NT operating system is being installed, select other
       manufacturers from the network adapter card options and follow
       steps 3-9.

    2. If Windows NT operating system is already installed, logon as
       Administrator and select Netwrok icon from the control panel.

    3. In the Network Setting dialog box, choose "Add Adapter"button.
       The Add Network Adapter dialog box appears.

    4. In the Add Network Adapter dialog box, pull the adapter card list
       menu and select "<Other>Requires disk from manufacturer" from the
       list, and then press <Enter> button. .

    5. Specify the driver diskette in Drive C:.

    6. In the netx windows, specify the correct drive and path
       (C:\GF100\WINNT35), and then choose the OK button.

    7. Then, select the "GF100TXRIII Series Fast Ethernet Adapter" from the dialog
       box to install GF100TXRIII PCI Adapter.

    8. The screen will appear "Input EthernetID" dialog box which is provide
       by RTL8139.SYS driver. This option is only required when you have more
       than one GF100TXRIII PCI Fast Ethernet Adapters on this computer. Select
       SKIP if only one adapter is installed on this computer.

    9. Finally close the Setup dialog box and exit from the Add Network
       adapter dialog box to complete the installation. Follow any
       instructions appearing on the screen.

   10. Shutdown and reboot the system.