******************************************************************************
 *          Genius LAN GF100TXRIII Fast Ethernet Card -- NetWare Driver       *
 ******************************************************************************


   A. Diskette Introduction :
   ==========================

   This sub-directory contains the following structures:

   NETWARE

    ³
      DOSODI      : Contains the .COM execution file for NetWare ODI
                    Workstation for V3.x, V4.x.

      CLIENT32    : Contains the NetWare CLIENT32 driver

      NW311       : Contains the NetWare 3.11 server driver

      NW312       : Contains the NetWare 3.12 server driver

      NW40X       : Contains the NetWare V4.0X server driver

      NW41X       : Contains the NetWare V4.1X server driver

      OS2         : Contains the NetWare OS2  Workstation driver



   B. Installation Guildline:
   ==========================

   The installation procedure is like as below:

   NOVELL Workstations DOS ODI:
   ---------------------

     * NetWare 386 V3.XX :

        Copy the .COM and NET.CFG files in sub-directory "DOSODI" to the
        working diskette or directory and execute the .COM file follow
        the command listing :

               LSL.COM
               RTSODI.COM
               IPXODI.COM
               NETX.EXE

               Therefore, you had attached the server and you must
               LOGIN the file server.

               Where the LSL.COM, IPXODI.COM, NETX.EXE are all supported
               by Novell.


     * NetWare V4.X :

        1. Copy the .COM and .INS files in sub-directory "DOSODI" to the
           Netware client directory \CLIENT\DOSWIN\DOS>
        2. Run NetWare Client Installation file INSTALL.BAT under DOSWINDOW
           sub-directory \CLIENT\DOSWIN>
        3. Follow the installation instruction from Step 1.
        4. Select "Genius LAN GF100TXRIII" on the menu bar for LAN card driver.
        5. Execute the following commands under \NWCLIENT> directory.

           LSL.COM
           RTSODI.COM
           IPXODI.COM
           VLM.EXE

           Therefore, you had attached the server and you must
           LOGIN the file server.

           Where the LSL.COM, IPXODI.COM, VLM.EXE are all supported
           by Novell.

     * NetWare CLIENT32:

        If you want to install the driver for GF100TXRIII Fast Ethernet Card
        on Client32,please refer to the installation documentation
        in the client32 subdirectory on the driver diskette.


   NOVELL Server:
   --------------

     * NetWare 3.11
         1. Decompress the GF100TXRIII Ethernet Card driver from fllopy disk
            to hard disk (C:\GF100\NETWARE\NW311).
         2. Copy all files from the C:\GF100\NETWARE\NW311 subdirectory on
            disk to the directory the NetWare 3.11 systm files located.
         3. Boot NetWare by excuting SERVER.EXE. Type the following command
            at the file server console:

                LOAD PATCHMAN
                LOAD LSLENH
                LOAD ETHERTSM
                LOAD RTSSRV
                BIND IPX TO RTSSRV


     * NetWare 3.12
         1. Decompress the GF100TXRIII driver from fllopy disk to hard disk
            (C:\GF100\NETWARE\NW312).
         2. Copy all files from the C:\GF100\NETWARE\NW312 subdirectory on
            disk to the directory the NetWare 3.12 systm files located.
         3. Boot NetWare by excuting SERVER.EXE. Type the following command
            at the file server console:

                LOAD ETHERTSM
                LOAD RTSSRV
                BIND IPX TO RTSSRV


     * NetWare 4.0X
         1. Decompress the GF100TXRIII Ethernet Card driver from fllopy disk
            to hard disk (C:\GF100\NETWARE\NW40X).
         2. Copy all files from the C:\GF100\NETWARE\NW40X subdirectory on
            disk to the directory the NetWare 4.0X systm files located.
         3. Boot NetWare by excuting SERVER.EXE. Type the following command
            at the file server console:

                LOAD ETHERTSM
                LOAD RTSSRV
                BIND IPX TO RTSSRV


     * NetWare 4.1X
         1. Decompress the GF100TXRIII driver from fllopy disk to hard disk
            (C:\GF100\NETWARE\NW41X).
         2. Copy all files from the C:\GF100\NETWARE\NW41X subdirectory on
            disk to the directory the NetWare 4.1X systm files located.
         3. Boot NetWare by excuting SERVER.EXE. Type the following command
            at the file server console:

                LOAD ETHERTSM
                LOAD RTSSRV
                BIND IPX TO RTSSRV


 ======================================================================