ENCORE 10/100Mbps Fast Ethernet PCI Adapter
                         Windows NDIS driver 


Contents:
---------

1. File Description
2. Driver Installation for Windows NT 3.51
3. Parameters Description

1. File Description
-------------------

Filename              Description
=================     =====================================================
README.TXT            Presents a summary of the contents for Windows NDIS
                      driver installation.

oemsetup.inf          Windows installation INFormation file for install

ipfnd3.sys            Windows NT 3.51 (NDIS 3) driver

2. Driver Installation for Windows NT 3.51
------------------------------------------------

    The Windows installation floppy or CD is needed to complete this
    installation.

    Adapter Installation Procedure
    --------------------------------------------

    a. Make sure your computer is power-off.

    b. Plug the adapter into one PCI 33MHz slot of your computer.

    c. Turn on the power. 

    Install and/or Update driver from diskette
    ------------------------------------------
    
     The following steps will lead you to install  ...

     a. Click Start->Settings->Control Panel. Double-click Network to start 
	the Network Control Panel Application(NCPA). 


     b. Click the  "Add Adapter..." button in the "Network Settings"
        dialog box.

     c. Select "<other> Requires disk from manufacturer" in Network
        Adapter Card list, and then click the "Continue" button in the
        "Add Network Adapter" dialog box,

     d. Insert the ENCORE 10/100Mbps Fast Ethernet PCI Adapter Driver Diskette
        in your floppy drive.

     e. Specify the pathname "A:\WINNT3" of the driver installation
        information file (OEMSETUP.INF) in the "Insert Disk" dialog box,
        and then click the OK button.

     f. Select "ENCORE 10/100Mbps Fast Ethernet PCI Adapter" and then
        click the OK button in the "Select OEM Options" dialog box.

     g. Windows NT does the copying.

     h. In "ENCORE 10/100Mbps Fast Ethernet PCI Adapter Setup", just click 
        continue.

     i. In "Windows NT TCP/IP Installation Options", just click 
        continue.

     j. Click the OK button in the "Network Settings" dialog box.

     k. In "TCP/IP Configuration", Specify the IP Address and then OK.

     l. Restart the Computer.


3. Parameter Description
------------------------
   	- Click Start->Settings->Control Panel. Double-click Network to start 
	the Network Control Panel Application(NCPA). Select "Adapter" tab.
	Choose the adapter - ENCORE 10/100Mbps Fast Ethernet PCI Adapter	
   
        Connection Type      Specify the connection type for the adapter.
                             Default: Auto-Sense