ENCORE 10/100Mbps Fast Ethernet PCI Adapter
                        Packet Driver


Contents:
---------

1. File Description
2. Driver Usage and Parameters Description


1. File Description
-------------------

Filename              Description
=================     =========================================================
README.TXT            Presents a summary of the contents for Packet driver
                      installation.
                      
IPFPKT.COM            Packet Driver is executed in DOS Command mode. 

IPFPKT.SYS            Packet Driver is executed while DOS loads config.sys 

2. Driver Usage and Parameters Description

    DEVICE=IPFPKT.SYS [/option] <packet_int_no>		; in CONFIG.SYS
    		or 
    IPFPKT.COM  [/option] <packet_int_no>
    
       <packet_int_no>      Software interrupt number Default is 0x60
       /w                   Windows mode
       /d                   Delay initialize
       /u                   Uninstall driver
       /n                   NetWare conversion
       /tx_buffers          Set tx buffer number.
       /rx_buffers          Set rx buffer number.
       /delaycounts         Set send packet delay count(micro sec).
       /autosense           Performs Power-Up Autosense on all types of
                            boards in order to connect to the active line,
                            and dynamic 10/100 autosensing (at run-time)
                            on boards supporting it.
       /100BaseTXFD         Select 100Mbps full-duplex mode.
       /100BaseTX           Select 100Mbps half-duplex mode.
       /10BaseTFD           Select 10Mbps  full-duplex mode.
       /10BaseT             Select 10Mbps  half-duplex mode.
       /Disable_FlowControl Disable flow control function.
       /slot=[1~f]          Select the slot to work with.