ENCORE 10/100Mbps Fast Ethernet PCI Adapter
                               NDIS2 DOS Driver


Contents:
---------

1. File Description
2. Driver Installation for Microsoft Network Client
3. Driver Installation for Microsoft LAN Manager
4. Parameters Description

1. File Description
-------------------

Filename              Description
=================     =====================================================
README.TXT            Presents a summary of the contents for NDIS2 driver 
                      installation.

MSLANMAN.DOS\IPFND2.DOS
                      NDIS2 Driver
                      This driver complies with NDIS 2.0.1 Driver SPEC.

MSLANMAN.DOS\IPFND2.NIF
					  The driver installation file for Microsoft LAN Manager.

MSLANMAN.DOS\OEMSETUF.INF
                      The driver installation file for Microsoft Network 
                      Client.
                      
MSLANMAN.DOS\PROTOCOL.INI
                      The configuration information file for Protocol Manager.
                      
                      
2. Driver Installation for Microsoft Network Client
----------------------------------------------------

  2.1. Under Microsoft Network Client subdirectory c:\NET, run SETUP.

  2.2. Move highlight to "Change Network Configuration", the press ENTER.

  2.3. Select "Add Adapter", then press ENTER.

  2.4. Select "Network card not shown in list below..", then press ENTER.

  2.5. Insert the driver diskette in floppy A, and specify your
       pathname A:\NDIS2\MSLANMAN.DOS, then press ENTER.

  2.6. Select "ENCORE 10/100Mbps Fast Ethernet PCI Adapter", then press ENTER.

  2.7. Move highlight to "Network Configuration is correct" to finish the
      installation.



3. Driver Installation for Microsoft LAN Manager
------------------------------------------------

  3.1. Copy IPFND2.NIF from your Driver diskette (A:\NDIS2\MSLANMAN.DOS) to Microsoft
     LAN Manager subdirectory C:\LANMAN.DOS\DRIVERS\NIF,
     Copy IPFND2.DOS and PROTOCOL.INI from your Driver diskette
     (A:\NDIS2\MSLANMAN.DOS) to Microsoft LAN Manager subdirectory
     C:\MSLANMAN.DOS\DRIVERS\ETHERNET\IPFND2.

  3.2. Under Microsoft LAN Manager subdirectory c:\MSLANMAN.DOS, run SETUP.

  3.3. Move highlight to "Configuration", the press ENTER.

  3.4. Select "Add New Config", the press ENTER.

  3.5. Select "ENCORE 10/100Mbps Fast Ethernet PCI Adapter", then press ENTER.

  3.6. Move highlight to "Network Configuration is correct" to finish the
     installation.


4. Parameters Description
-------------------------
  The following parameters are used in IPGND2.DOS.
  4.1 Connection Type 
      This parameter specify the connection speed. The accepted value are 
      AutoSense, S10HD, S10FD, S100HD, S100FD
      


Histories of Release:

  ***) 1.01,  12-18-2003
  ***) 1.02,  05-21-2004