Workstation for DOS ODI Client

   Introduction:
   -------------
   This document describes the procedure to setup the NetWare DOS Requester
   driver for PnP EthernetCard.

   Location of Driver:     \DOS\PNPODI.COM

   Sample Configuration Files:
   ---------------------------
      STARTNET.BAT:
         LSL
         PNPODI
         IPXODI
         VLM 

      NET.CFG
         LINK DRIVER PNPODI
              FRAME ETHERNET_802.2
              EtherID = 0123456789AB   ---->  This keyword  is Ethernet
                                              address of a adapter, and
                                              only  required  when more
                                              than one PnP EthernetCards                                                         
                                              exist on one system
         NETWARE DOS REQUESTER
              FIRST NETWORK DRIVE = F

  
   Setup Procedures for Novell NetWare DOS Requester ( VLM) :
   -----------------------------------------------
      The  installation utility  INSTALL.EXE  is  located on NetWare's
      "Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
      for DOS Disk.

      The NetWare Client Install program screen will appear.  You must
      complete each of the questions.  These options are specific to your
      needs.

      1. Enter the destination directory for the NetWare Client.
         (The default directory is C:\NWCLIENT.)

      2. Gives you the option to automatically update the CONFIG.SYS
         and the AUTOEXEC.BAT files or modify them at a later time manually.

      3. Do you wish to install support for MS Windows ? (Y/N)
         (MS Windows Subdirectory: default C:\WINDOWS)

      4. Asks you to select a network  driver and  provide  configuration
         options.  It uses the  specifications  you select to  create the
         file NET.CFG.  Insert the PnP EthernetCard drivers diskette when 
         prompted for the driver diskette and specify the driver path
 
         A:\

      5. Press <Enter> to install


   NOTE:
   -----
      1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
         network mappings to work properly.

      2. Installing Multiple LAN Adapters:
         The keyword, EtherID, is provided for multiple LAN adapters in a
         single system by  PNPODI.COM. If EtherID unknown, you can ignore
         it in the  NET.CFG  file and directly run  PNPODI  under the DOS
         prompt,then your screen will  display  every adapter EtherID and
         select which one you need.