Driver Installation Guide for MS LAN Manager v2.x (DOS)
     =============================================================

Introduction
============
    This document describes the procedure to setup LAN Manager 2.x DOS
    Workstation driver for PN-16 Series Ethernet Adapter.

    These drivers conform to the Network Driver Interface Specification
    (NDIS 2.01) defined by Microsoft/3Com.


Installation Procedures
=======================

 A. Suppose you install MS LAN Manager on a DOS workstation for the
    first time.

    1. Execute the "SETUP.EXE" program that is provided by LAN Manager.
       Upon completion of retrieval of the last workstation disk's
       contents, you will be asked if you want to import additional
       network drivers.  Answer "YES".

    2. Insert the driver diskette into the floppy drive.

    3. Follow the instructions on the screen. "SETUP.EXE" program will
       retrieve NDIS driver programs from the diskette and put them on
       the harddisk and directory where LAN Manager resides.

    4. After completion of the setup procedure, your CONFIG.SYS file will
       contain statements for the PN16.DOS NDIS driver program as sample
       file.

    5. Reboot your computer and follow NDIS binding procedure to use
       the NDIS driver programs.


 B. If you have installed LAN Manager in your harddisk.

    1. Execute the "SETUP.EXE" program.

    2. On the screen, select 'Configuration', 'Network Drivers',
       'other Drivers' function and input correct diskette driver name.

    3. Insert the driver diskette into the floppy drive.

    4. Follow the instructions on the screen. "SETUP.EXE" program will
       retrieve all NDIS driver programs from the PN-16 driver disk
       and put them on the directory where LAN Manager resides.

    5. After completion of the setup procedure, your CONFIG.SYS file
       will contain statements for the PN16.DOS NDIS driver program.

    6. Reboot your computer and follow NDIS binding procedure to use
       the PN16.DOS NDIS driver programs.


    --- Sample CONFIG.SYS file ---

	  :
	DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
	DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\PN16\PN16.DOS
	  :


    --- Sample PROTOCOL.INI file ---

	[PROTMAN]
	  DRIVERNAME = PROTMAN$
	  DYNAMIC = YES
	  PRIORITY = NETBEUI

	[NETBEUI_XIF]
	  Drivername = netbeui$
	  SESSIONS = 6
	  NCBS = 12
	  BINDINGS = "PN16_NIF"
	  LANABASE = 0

	[PN16_NIF]
	  DRIVERNAME = PN16$