Packet Driver Installation Guide for FTP PC/TCP ===================================================== Introduction ============ This document describes the procedure to install Packet Driver for PN-16 Series Ethernet Adapter. The PN16PD.COM program is complies with the FTP PC/TCP Packet driver Specifications. This packet driver allow you to use The PN-16 Series Ethernet Adapter with FTP PC/TCP software. Installation Procedures ======================= 1. Execute the PN16PD.COM program by follows command line : > PN16PD [ ] : interrupt vector number, which can be decimal, hexadecimal or octal format. if: decimal format -- from 96 to 128 hexadecimal ----- from 0x60 to 0x80 octal format ---- from 0140 to 0200 : interrupt setting. The default setting is 3. : I/O Base Address setting. The default setting is 0x300. Note: user can use default settings by only type "PN16PD". The program will automatic search PN-16 Series Ethernet adapter, and uses its internal setting. 2. Execute the \ETHDRV.EXE device program, which is provided by FTP with PC/TCP software package together. Now, your PN-16 Series Ethernet Adapter is work with FTP PC/TCP. Note: Except the FTP software's PC/TCP package, most of the DOS version's TCP/IP software also can be run with packet driver. Please refer to the software package installation for packet driver install procedure.