Driver installation Guide for Novell NetWare v4.x server
    ==============================================================

Introduction
============
    This document describes the procedure to install Netware 4.x server
    driver for PN-16 Series Ethernet Adapter.


Installation Procedures
=======================

    1. Boot NetWare file server by executing "SERVER" as you usually do.

    2. When the NetWare 386 prompt appears (indicated by a colon),
       to load the driver manually, simply at the system console screen
       type the following command:

       : Load NE2000 INT=x PORT=xxx Frame=Ethernet_xxxx

       Note : INT, PORT depend on your harware setting.
	      Frame type depend on your network.

    3. Bind IPX to the adapter driver. At the NetWare server prompt, type:

       : Bind IPX to NE2000 Net=xxx

       Note:  Net value depend on your network configuration.

    4. Add the load and bind statements you require to the server's
       AUTOEXEC.NCF file so that the LAN driver will load automatically
       each time the server starts up.