Driver Installation Guide for MS LAN Manager v2.x (OS/2)
     ==============================================================

Introduction
============
    This document describes the procedure to setup LAN Manager 2.x OS/2
    Workstation/Server driver for PN-16 Series Ethernet Adapter.

    These drivers conform to the Network Driver Interface Specification
    (NDIS 2.01) defined by Microsoft/3Com.


Installation Procedures
=======================

 A. Suppose you install MS LAN Manager on a OS2 workstation for the
    first time.

    1. Execute the "SETUP.EXE" program that is provided by LAN Manager.
       Upon completion of retrieval of the last workstation disk's
       contents, you will be asked if you want to import additional
       network drivers.  Answer "YES".

    2. Insert the driver diskette into the floppy drive.

    3. Follow the instructions on the screen. "SETUP.EXE" program will
       retrieve NDIS driver programs from the diskette and put them
       on the harddisk and directory where LAN Manager resides.

    4. Reboot your computer and follow NDIS binding procedure to use
       the NDIS driver programs.


 B. If you have installed LAN Manager in your harddisk.

    1. Execute the "SETUP.EXE" program.

    2. Insert the driver diskette into the floppy drive.

    3. On the screen, select 'Configuration', 'Network Drivers',
       'other Drivers' function and input correct diskette driver name.

    4. Follow the instructions on the screen. "SETUP.EXE" program will
       retrieve NDIS driver programs from the NDIS driver disk and put
       them on the harddisk and directory where LAN Manager resides.

    5. Reboot your computer and follow NDIS binding procedure to use
       the PN16.OS2 NDIS driver program.


    --- Sample PROTOCOL.INI file ---

	[PROTOCOL MANAGER]
	  DRIVERNAME = PROTMAN$

	[NETBEUI_XIF]
	  Drivername = netbeui$
	  SESSIONS = 40
	  NCBS = 85
	  BINDINGS = "PN16_NIF"

	[PN16_NIF]
	  IOBASE = 0x300		 ; Depends on Adapter's setting
	  INTERRUPT = 3 		 ; Depends on Adapter's setting
	  DRIVERNAME = PN16$