NDIS Driver Installation Guide for IBM LAN Server
       =======================================================

Introduction
============
    This document describes the procedure to install NDIS driver on IBM
    OS/2 LAN Server for PN-16 Series Ethernet Adapter.

    These drivers conform to the Network Driver Interface Specification
    (NDIS 2.01) defined by Microsoft/3Com.


Installation Procedures
=======================

 A. Installing the driver for IBM LAN Server 2.0 or 3.0 :

    Before you start with the installation  process,  make sure that
    OS/2 LAN Server  is properly installed.  Similarly, your adapter
    should also be properly installed in your server.

    1. Copy PN16.OS2 and PN16.NIF files from your Driver diskette
       (\LANSRVR) to C:\IBMCOM\MACS.

    2. Click the OS/2 LAN Service icon.

    3. Select "Installation  and  configuration".  The IBM logo should
       appear onscreen.

    4. Click <OK>.

    5. Select <Advance> and press <Enter>.

    6. Select "Install or Configuration this Workstation."

    7. Select server type, adding a server or domain controller.  The
       "install or remove" selections should appear.

    8. Select "Configure a component."

   10. Click the "Configure" button.

   11. Select "Configure workstation."

   12. Select "PN-16 Series Ethernet Adapter" when prompted to identify
       you Network Adapter. Then click the <Add> button.

   13. Select IBM NETBIOS from the list and click the <Add> button.

   14. Select <OK> to confirm all selections.

   15. Follow screen instructions to complete the process, selecting
       <OK> to accept default selections.

   16. Installation is complete now. Reset your PC by turning it off
       and on.


 B. Installing the driver for IBM OS/2 LAN Server 4.0 :

    Before you start with the installation  process,  make sure that
    OS/2 LAN Server  is properly installed.  Similarly, your adapter
    should also be properly installed in your server.

    1. In OS/2 window, Click the "MPTS" icon.

    2. The screen will display the IBM Log, press "OK".

    3. Select "Install" button.

    4. Insert the PN-16 driver diskette, specify the driver path
       A:\LANSRVR and press <Enter>.

    5. When complete above step to load PN16.OS2 into OS/2 system,
       then configure your system.

    6. The same step as step 3, select "Configure" button.

    7. The screen will display "Configure" dialog box and select "LAN
       adapters and protocols" then press "configure" button.

    8. The screen will display "LAPS Configuration" dialog box, move
       highlight to "PN-16 Series Ethernet Adapter" item in "Network
       Adapter" window, and select "NetBios" protocol. Press "OK".

    9. Installation is complete now. Reset your PC by turning it off
       and on.