Installation 16-bit Ethernet Adapter in Microsoft Window WorkGroup v3.1
    ---------------------------------------------------------------------

    I. Follow Window Workgroup installation instructions (Setup):

    II. Select 'NE2000 Compatible' in network adapter configuration and
        input IRQ, I/O address

    III. Complete Installation

    IV. When the Window WorkGroup installation is complete, you may use any
        text editor to edit PROTOCOL.INI file (under C:/Windows).

        Following is the PROTOCOL.INI file by selecting "NE2000 compatible"
        and IRQ=3, I/O=300:

    [network.setup]
    version=0x3100
    netcard=ms$ne2clone,1,MS$NE2CLONE
    transport=ms$netbeui,MS$NETBEUI
    lana0=ms$ne2clone,1,ms$netbeui

    [protman]
    DriverName=PROTMAN$
    PRIORITY=MS$NETBEUI

    [MS$NE2CLONE]
    DriverName=MS2000$
    IOBASE=0x300
    INTERRUPT=3

    [MS$NETBEUI]
    DriverName=netbeui$
    SESSIONS=10
    NCBS=32
    BINDINGS=MS$NE2CLONE
    LANABASE=0

    Following is sample file of Config.sys:

    FILES=70
    BUFFERS=40
    DEVICE=HIMEM.SYS
    device=emm386.exe 1024 frame=e000 ram
    dos=high,umb
    device=C:\WINDOWS\protman.dos /i:C:\WINDOWS
    device=C:\WINDOWS\workgrp.sys
    device=C:\WINDOWS\NE2000.DOS
    stacks=9,256


    V. Edit the PROTOCOL.INI file and modified as follows.  The only line
       need to be modified is DriverName.  You may also change the IRQ and
       I/O address according to the hardware configuration.


    [network.setup]
    version=0x3100
    netcard=ms$ne2clone,1,MS$NE2CLONE
    transport=ms$netbeui,MS$NETBEUI
    lana0=ms$ne2clone,1,ms$netbeui


    [protman]
    DriverName=PROTMAN$
    PRIORITY=MS$NETBEUI

    [MS$NE2CLONE]
    DriverName=NE2000$
    IOBASE=0x300
    INTERRUPT=3

    [MS$NETBEUI]
    DriverName=netbeui$
    SESSIONS=10
    NCBS=32
    BINDINGS=MS$NE2CLONE
    LANABASE=0


    VI.  You need not change Config.sys file if you select 'NE2000
         Compatible' in installation.  If you do not select 'NE2000
         Compatible', make sure follow device driver is inserted into
         Config.sys:

                   device=C:\WINDOWS\NE2000.DOS

    VII. Copy NE2000 NDIS driver:

         Locate the NE2000 NDIS driver in the driver diskette comes with
         the adapter: A:\MSLANMAN.DOS\DRIVERS\ETHERNET\NE2000\NE2000.DOS,
         and copy the files to C:\Windows subdirectory




    Installation 8-bit Ethernet Adapter in Microsoft Window 
    WorkGroup v3.1 in a DOS PC
    -------------------------------------------------------------------

    I. Follow Window Workgroup installation instructions (Setup):

    II. Select 'NE1000 Compatible' in network adapter configuration and
        input IRQ, I/O address

    III. Complete Installation

    IV. When the Window WorkGroup installation is complete, you may use any
        text editor to edit PROTOCOL.INI file (under C:/Windows).

        Following is the PORTOCOL.INI file by selecting "NE1000 compatible"
        and IRQ=3, I/O=300:

    [network.setup]

    version=0x3100
    netcard=ms$ne1clone,1,MS$NE1CLONE
    transport=ms$netbeui,MS$NETBEUI
    lana0=ms$ne1clone,1,ms$netbeui

    [protman]
    DriverName=PROTMAN$
    PRIORITY=MS$NETBEUI

    [MS$NETBEUI]
    DriverName=netbeui$
    SESSIONS=10
    NCBS=32
    BINDINGS=MS$NE1CLONE
    LANABASE=0

    [MS$NE1CLONE]
    DirverName=MS1000$
    IOBASE=0x300
    INTERRUPT=3

    Following is sample file of Config.sys:

    FILES=70
    BUFFERS=40
    DEVICE=HIMEM.SYS
    device=emm386.exe 1024 frame=e000 ram
    dos=high,umb
    device=C:\WINDOWS\protman.dos /i:C:\WINDOWS
    device=C:\WINDOWS\workgrp.sys
    device=C:\WINDOWS\NE1000.DOS
    stacks=9,256

    V. Edit the PROTOCOL.INI file and modified as follows.  The only line
       need to be modified is DriverName.  You may also change the IRQ and
       I/O address according to the hardware configuration.

    [network.setup]

    version=0x3100
    netcard=ms$ne1clone,1,MS$NE1CLONE
    transport=ms$netbeui,MS$NETBEUI
    lana0=ms$ne1clone,1,ms$netbeui

    [protman]
    DriverName=PROTMAN$
    PRIORITY=MS$NETBEUI

    [MS$NETBEUI]
    DriverName=netbeui$
    SESSIONS=10
    NCBS=32
    BINDINGS=MS$NE1CLONE
    LANABASE=0

    [MS$NE1CLONE]
    DriverName=NE1000$
    IOBASE=0x300
    INTERRUPT=3


    VI.  You need not change Config.sys file if you select 'NE1000
         Compatible' in installation.  If you do not select 'NE1000
         Compatible', make sure follow device driver is inserted into
         Config.sys:

                     device=C:\WINDOWS\NE1000.DOS

    VII. Copy NE1000 NDIS driver:

         Locate the NE1000 NDIS driver in the driver diskette comes with the
         adapter:  A:\MSLANMAN.DOS\DRIVERS\ETHERNET\NE2000\NE1000.DOS, and copy
         the files to C:\Windows subdirectory




    Installation 8-bit ARCnet Adapter in Microsoft Window WorkGroup v3.1
    --------------------------------------------------------------------

    I. Follow Window Workgroup installation instructions (Setup):

    II. Select 'ARCNET Compatible' in network adapter configuration and
        input IRQ, I/O address and Memory address

    III. Complete Installation

    IV. When the Window WorkGroup installation is complete you may use any
        text editor to edit PROTOCOL.INI file (under C:/Windows).

        Following is the sample PROTOCOL.INI file by selecting ARCNET
        compatible and IRQ=2, I/O=2E0 and Memory=D000

    [network.setup]

    version=0x3100
    netcard=ms$arcclone,1,MS$ARCCLONE
    transport=ms$netbeui,MS$NETBEUI
    lana0=ms$arcclone,1,ms$netbeui

    [protman]
    DriverName=PROTMAN$
    PRIORITY=MS$NETBEUI

    [MS$NETBEUI]
    DriverName=netbeui$
    SESSIONS=10
    NCBS=32
    BINDINGS=MS$ARCCLONE
    LANABASE=0

    [MS$ARCCLONE]
    DriverName=SMC_ARC$
    interrupt=2
    iobase=0x2E0
    memorybase=0xD000

    Following is sample file of Config.sys:

    FILES=70
    BUFFERS=40
    DEVICE=HIMEM.SYS
    deivce=emm386.exe 1024 frame=e000 ram
    dos=high,umb
    device=C:\WINDOWS\protman.dos /i:C:\WINDOWS
    device=C:\WINDOWS\workgrp.sys
    device=C:\WINDOWS\SMC_ARC.DOS
    stacks=9,256

    V. The 8-bit ARCnet Adapters are fully compatible with Microsoft 
       Window Workgroup ARCnet driver; therefore, you need not do any
       modification.  You may start the WorkGroup immediately.