**********************************************************************
 *   LAN ADAPTER Series -- Setup/Diagnostic Program          V200     *
 **********************************************************************
						       Date: 10/13/1994


   A. OVERVIEW
   ===========
   The SETUP.EXE Program is used to configure and verify the correct
   configuration and operation of an LAN ADAPTER series LAN
   adapter before installing the network software.



   B. BEFORE STARTING THE PROGRAM
   ==============================
  
   1. After turning off the PC's power, insert the adapter into the PC.

   2. Boot the PC to a DOS prompt.

       ** Memory resident (TSR) programs and device drivers should
	  not be loaded while the Diagnostic Program is active, so
	  you may need to temporarily rename your CONFIG.SYS and
	  AUTOEXEC.BAT files.  The Diagnostic Program is always run
	  without loading any network software.



   C. STARTING THE PROGRAM
   =======================
   The LAN ADAPTER series support Jumper+Jumperless mode.
   The adapter configuration  could be used in Jumperlss mode
   only.


   1. In the DOS prompt, type SETUP to run
      Setup/Diagnostic Program, like as below:

      A:>SETUP

      
   2. Configuration:
       

       View Configuration - To look at the configuration currently contained
			    in the LAN adapter.

       Auto Setup Configuration  - The setup program will auto detect and 
                                   reconfigure IRQ and I/O that confict.

       Manual Setup Configuration - Select Manual Setup to setup hardware
                                    configurations that you want, such
                                    as I/O, IRQ, BootROM usage.

       Exit


   3. Diagnostic
      
      Select Diagnostic to get into configuration submenu.

      Board Diagnostic       - Test to see if the adapter's function is 
			       correct.

      Network Diagnostic     - To verify the adapter transceiver is ok.

      Exit


   D. SUPPORT
   ==========
   If you have any additional questions regarding your Setup/Diagnostic
   Program, contact your dealer or distributor's technical support
   department.

 ======================================================================