Driver Installation Guide for Windows NT 4.0
          ==================================================

Introduction
============
    This document describes the procedure to install Windows NT 4.0
    driver for NE2000 Compatible Ethernet Adapter.


Installation Procedures
=======================

    1. If Windows NT operating system is being installed, select other
       manufacturers from the network adapter card options and follow
       steps 3-13.

    2. If Windows NT operating system is already installed, logon as
       Administrator and select Netwrok icon from the control panel.

    3. In the Network Setting dialog box, choose "Adapters" menu.

    4. Click on "Add".

    5. Click on "Have Disk" .

    6. Insert a driver diskette in driver A or B.

    7. Typing "A:\WINNT40" or "B:\WINNT40" and then click on the "OK" button.

    8. The screen will highlight "NE2000 Compatible Ethernet Adapter" and
       click on "OK".

    9. The screen will appear "NE2000 Compatible Network Card Setup" dialog
       box .The IRQ Level and I/O Port Address value are "AUTOSENSE" .

   10. Click on "OK".

   11. The Windows NT 4.0 OS will copy some files.

   12. The NE2000 Compatible Ethernet Adapter will display on adapter list,
       click on the "Close" button.

   13. Shutdown and reboot the system.