Driver Installation Guide for Windows NT 3.5 ================================================== Introduction ============ This document describes the procedure to install Windows NT 3.5 driver for NE2000 Compatible Ethernet Adapter. Installation Procedures ======================= 1. If Windows NT operating system is being installed, select other manufacturers from the network adapter card options and follow steps 3-8. 2. If Windows NT operating system is already installed, logon as Administrator and select Netwrok icon from the control panel. 3. In the Network Setting dialog box, choose "Add Adapter" button. The Add Network Adapter dialog box appears. 4. In the Add Network Adapter dialog box, pull the adapter card list menu and select "Requires disk from manufacturer" from the list, and then press button. . 5. Insert the driver diskette in Drive A/B. 6. In the next windows, specify the correct drive and path (A:\WINNT35 or B:\WINNT35) when asked to give the source for the driver, and then choose the "OK" button. 7. Then, select the "NE2000 Compatible Ethernet Adapter" from the dialog box to install driver. 8. Finally close the Setup dialog box and exit from the Add Network adapter dialog box to complete the installation. Follow any instructions appearing on the screen. 9. Shutdown and reboot the system.