Driver Installation Guide for MS Windows 95
           =================================================

Introduction
============
    This document describes the procedures to install MS Windows 95 driver
    for NE2000 Compatible Ethernet Adapter.


Installation procedure
======================

    1. When log into Windows 95, click on the "Start" icon ,then move the
       mouse to "Settings" icon and click on the "Control Panel".

    2. In the Control Panel window, click on the "Network" icon.

    3. In the Network Configuration dialog box, choose the "Add.." button.

    4. When the Select Network Component Type dialog box appears, select
       "Adapter" icon and then press "Add" button.

    5. In the Selected Network adapters dialog box, Choose the "Have disk"
       button.

    6. Insert the driver diskette into drive A or B.

    7. When the Install From Disk dialog box appear, specify the driver path
       (A:\WIN95 or B:\WIN95) and then choose "OK" button.

    8. Then, you will see "NE2000 Compatible Ethernet Adapter" list in the
       dialog box, choose "OK" button.

    9. The Windows 95 OS begin to copy driver from diskette and some system
       files from Windows 95 installation CD or diskette.

   10. Then, you will see "NE2000 Compatible Ethernet Adapter" list in the
       Network Configuration dialog box, select it and then click on the
       "Properties" button.

   11. In this dialog box, select "Resources ",the screen will come up with
       settings: IRQ  and  I/O address.  Make sure the  values that come up
       match the actual board settings.

   12. Restarting your system you will acquire network service.