Installing The NDIS 3.0 Driver ------------------------------ Installation of E200 NDIS 3.0 driver for specific environment is described below. Microsoft Windows NT Note: 1) The directory structure provided on the E200 NDIS 3.0 driver diskette has been setup for automatic OEM installation. Also, more information can be found in the Microsoft Windows NT User's Guide. 2) Only x86-based Windows NT platforms are supported. Follow the steps listed below: 1 Insert the E200 NDIS 3.0 driver diskette into the floppy drive. 2 From the "Control Panel" in the "Windows NT Main" window, double click on the "Network" icon to install the E200 EthernetCard. 3 In the "Network Settings" dialog box, choose "Add Adapter". 4 In the "Add Network Adapter" dialog box, pull down the adapter card list menu and select " Requires disk from manufacturer" from the list and continue. 5 In the next window, enter: A:\ 6 Then, select E200 EthernetCard from the dialog box to install the E200 EthernetCard. 7 In the "E200ND3 EthernetCard Setup" dialog box, please enter the correct I/O port, IRQ values to correspond with what is set on the card. If no values are selected, the default values will be chosen by the E200 EthernetCard driver. 8 Reboot your system to complete the driver installation process. For additional information, please refer to your Microsoft Windows NT OS documentation. -------------------------------------[END]--------------------------------------