E200 EthernetCard Configuration and Diagnostics file
----------------------------------------------------

To configure your E200 Ethernet Card, execute the configuration file,EZSET.
A screen menu will guide you to configure the E200 Ethernet Card to fit your
compyter system's environment.

The following is the configuration parameters.

   I/O Address :       240h,280h,2c0h,300h,320h,340h,360h

   IRQ Line    :       2(9),3,4,5,10,11,12,15

   BOOT ROM Address :  C800h,CC00h,D000h,D400h,D800h,DC00h

   Data Width  :       8 bits or 16 bits; auto sensing by hardware


   Note: You can use this utility to configure two or more E200 Ethernet Cards
         which are installed on the same computer system.



Before you install the drivers and connect the E200 Ethernet Card to the network
, make sure to run the diagnostics to assure the proper function of the E200
Ethernet Card. The diagnostics includes two groups of test :

   1. Card initialization and loopback test

      This test performs the function of verifying the components, connectors,
      and circuitry.

   2. Network test

      This test performs the data transmission and reception of the adapter.
      A screen menu provides you with the instructions to conduct this test.

------------------------------------[END]---------------------------------------