Apr. 1995
	      D-Link Drivers Installation Readme
			     for
		       Windows NT V3.5
		       ===============
***********************************************
*  README for Windows NT V3.5 Installation    *
***********************************************

The DE620 Ethernet LAN drivers of DE-620 cards for Windows NT contained in this
diskette are as follows:

\NT31\DE620.SYS     NDIS 3.0 driver for Windows NT V3.5
\NT31\OEMSETNT.INF  OEMSETUP file for Windows NT V3.5
\DISK1

Installation Procedure:

(1)  When LAN drivers is installed, Windows NT will present a list of all
     available drivers.  Since there will be no D-Link DE-620 drivers
     initially, select OTHERS for 3rd party adapters not in the driver list.

(2)  Windows NT will ask for the drive/path containing the DE-620 Windows NT
     drivers.  Insert the D-Link driver diskette in drive A: and respond with
     the following

     A:\NT35

(3)  Windows NT will attempt to locate an OEMSETNT.INF file in the specified
     path. If you have entered the path name correctly, Windows NT should copy
     the appropriate drivers to the Windows NT system.

(4)  At this point, the driver would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows NT installation guide for correct procedures.

(5)  After the initial installation, the DE-620 drivers will be permanently
     copied to the Windows NT system.  Subsequent network driver lists will
     already contain D-Link DE-620 driver.