D-Link Support Publishing       \WFW311\README.TXT

        D-Link DE-220 Family ISA Ethernet Card Installation
                   for Windows for Workgroup 3.11

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Please consult \SETUP\README.TXT for help with the adapter setup.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     An ISA compatible computer
     Microsoft's Windows for Workgroup 3.11
     A DE-220 Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable will this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any DE-220 Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    Note: The DE-220 Family WFW 3.11 driver comply to NDIS 3.0 specs.

     When a LAN driver is installed, Windows for Workgroups will present a
      list of all available drivers.  Since there will be no drivers
      (DE22X.386, DE22X.DOS and DE22X.COM driver programs ) initially,
      select UNLIST for third-party adapters not included in the list.

     Windows for Workgroups will ask for the path where the adapter drivers
      reside. Insert the driver diskette in Drive A and type:

        A:\WFW311

      Modify the path accordingly. (ie. If the AUTOinstall was used C:\WFW311)

     Windows for Workgroups will check whether or not the OEMSETUP.INF
      file exists in the specified path. If the file exists, Windows for
      Workgroups will then copy the appropriate drivers into the Windows
      for Workgroups system.

      The driver is now properly copied. Installation will then proceed to
      the next steps. For information on these steps, please refer to your
      Windows for Workgroups manual.

      After installation, the drivers will be part of the Windows for
      Workgroups system. Subsequent accesses to the driver lists will
      include the DE-220 Family drivers.