================================================================== NOTES ON Installing D-Link DE-220 Family Ethernet Adapter For Personal Netware Users ================================================================== (c) 1997 Copyright D-Link Corporation ALL RIGHTS RESERVED This document contains DE-220 Family Ethernet Adapter installation notes, which is not included in the DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions, for Personal Netware users. This document contains information on the following topics: 1.0 Overview 2.0 Installation Notes __________________________________________________________ 1.0 Overview ------------ The ODI driver program allows you to run multiple protocol stacks and install up to two network adapters in a workstation. This ODI driver supports the Port, Node Address, Protocol and Frame options for creating your own NET.CFG file. For more information on these keywords, please refer to Novell's "NetWare ODI shell for DOS - NET.CFG options". 2.0 Installation Notes ---------------------- The NOVELL Personal NetWare installation diskettes are needed to complete this installation. 1. Follow the normal installation procedure as described by Personal Netware. 2. It will prompt you for a network driver. Choose "Other Network support driver". 3. It will request a path for the drivers. Respond with the path of the ODI DOS driver, .INS file, and NET.CFG sample installed with this readme. 4. After completion of the installation procedure, modify the following lines in your STARTNET.BAT file from: LSL NE2000 IPXODI A CLIENT to: LSL DE22X IPXODI A CLIENT 5. Append the \NET.CFG file to the NWCLIENT directory. This directory was created when you installed Personal NetWare . is the directory where NET.CFG resides. 6. Run STARTNET to access the Novell network.