==================================================================
NOTES ON
Installing D-Link DE-220 Family Ethernet Adapter
For Lan Support/Services Users
==================================================================
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains DE-220 Family Ethernet Adapter installation notes,
which is not included in the DE-220 Family Ethernet Adapter USER'S GUIDE
or onscreen instructions, for Lan Support/Services users.

This document contains information on the following topics:

1.0 Overview
2.0 Installation Notes For Lan Support users
3.0 Installation Notes For Lan Services 4.x

-------------------------------------------------------------------

1.0 Overview
------------

Lan Support/Services users please also refer to the following:

    -------------------------------------------------------------------
      File                Description/Installation notes
    --------------------------------------------------------------------
      \NDIS2\README.TXT   Overall installation notes for all NDIS users

2.0 Installation Notes For Lan Support users
--------------------------------------------
    There are two Installation methods available to install DE-220 drivers
    for Lan Support users:

    2.1 Method 1
    ------------
    1. Insert the LAN Support diskette in Drive A.

    2. Run DXMAID which is the install program.
       Example:

                A:\> dxmaid

       The following message then appears:

                "Do you have driver diskettes?"  [Yes]

       Use the Spacebar to switch between "no" and "yes".

       After copying LAN Support, insert the driver diskette into the
       floppy disk drive.

    3. specify the drive and path of the DOS NDIS files.

       Example:         A:\NDIS2\DOS
                           or
                        B:\NDIS2\DOS

    4. The installation procedure is completed after copying the
       necessary file.

    2.2 Method 2 -- Modifying the contents of the CONFIG.SYS and
                    PROTOCOL.INI files after installing other NICs
    --------------------------------------------------------------
    1. Copy the DE22X.DOS file to the directory where your IBM LAN
       Support program resides.

    2. Modify the NDIS device driver statement in the CONFIG.SYS as
       follows:

       DEVICE = [drive]:\path\DE22X.DOS

    3. Modify the PROTOCOL.INI file as follows:

       BINDINGS = DE22XIBM_NIF
             :
             :
       [DE22XIBM_NIF]
       DRIVERNAME = DE22X$

3.0 Installation Notes For Lan Services 4.x
-------------------------------------------

    1. Execute the installation program from the IBM DOS LAN SERVICES
       diskette.

       Example:

       C:\>a:\install

    2. From the Network card field, select "Network card not shown in list
       below...".

    3. Insert the driver diskette into the floppy disk drive.

    4. Specify the path for the corresponding oemsetup.inf file of the OEM
       driver intended for use. Then, press Enter. The program then
       displays the driver name.

       Example:
                A:\NDIS2\DOS

    5. Check that the driver configuration is correct.

    6. Complete the installation, restart your system to use the DOS LAN
       Services.