Driver Installation Guide for Windows For Workgroups 3.10
    ===============================================================

 This file contains the information about how to install AE200.DOS Driver
 (NDIS 2.0.1) into Windows For Workgroup 3.10. Install NDIS 2.0.1 Driver
 into Windows For Workgroups as following procedures .

 Installation Procedures :

 A. Install driver when Windows For Workgroups 3.10 doesn't exist.

    1. Run Windows SETUP.EXE. Wait for Windows to request information about
       your network adapter. Then select "Unlisted or Updated Network Adapter".
       and press OK button.

    2. Windows will display a dialog screen to ask the driver path. enter
       "A:\WFW\WFW310" or "B:\WFW\WFW310" and press return or OK button.

    3. After Windows has read the needed files. It will show another dialog
       screen. You can select hardware configuration as your adapter settings.

    4. Windows stores the setting, You can restart your computer to start
       the driver.


 B. Install driver when Windows For Workgroups 3.10 already exists.

    1. Start your Windows For Workgroups and open main group.

    2. Select "CONTROL PANEL" icon in main group.

    3. Select "NETWORK" icon in control panel window.

    4. Select "ADAPTERS" icon in network window.

    5. Select "Unlisted or Updated Network Adapter" and press OK button.

    6. A dialog screen is displayed on the screen to ask the driver path.
       Enter "A:\WFW\WFW310" or "B:\WFW\WFW310" and press return or OK button.

    7. After Windows has read the needed files. It will show another dialog
       screen. You can select hardware configuration as your adapter settings.

    8. After Windows stores the setting, You can restart your computer to
       start the driver.