Packet Driver Installation Guide for FTP PC/TCP
       =====================================================

 The AE200PD.COM program is complies with the FTP PC/TCP Packet driver
 Specifications. This packet driver allow you to use The AE-200 Series
 Ethernet Adapter with FTP PC/TCP software.

 Installation Procedures :

    1. Execute the AE200PD.COM program by follows command line :

	    > AE200PD [<SOFTWARE_INT> <IRQ> <IO_ADDR>]

       <SOFTWARE_INT> :  Interrupt vector number, which can be
			 decimal, hexadecimal or octal format.
			 if:
			 decimal format -- from 96 to 128
			 hexadecimal ----- from 0x60 to 0x80
			 octal format ---- from 0140 to 0200

       <IRQ> :		Interrupt setting. The setting can be selected 2, 3,
			4, 5, 10, 11, 12 or 15.
			The default setting is 3.

       <IO_ADDR>  :	I/O Base Address setting.
			The setting can be selected 0x240, 0x280
			0x2C0, 0x300, 0x320, 0x340, and 0x360.
			The default setting is 0x300.

       Note: user can use default settings by only type "AE200PD". The
	     program will automatic search the AE-200 Series Adapter,
	     and uses its internal setting.

    2. Execute the \ETHDRV.EXE device program, which is provided
       by FTP with PC/TCP software package together.

       Now, your AE-200 Series Ethernet Adapter is work with FTP PC/TCP.


       NOTE: Except the FTP software's PC/TCP package, most of the DOS
	     version's TCP/IP software also can be run with packet driver.
	     Please refer to the software package installation for packet
	     driver install procedure.