NDIS Driver Installation Guide for IBM LAN Server
	=======================================================

 The AE-200 Series NDIS driver programs for OS/2 are developed following the
 Microsoft's NDIS specification version 2.0.1.

 Installation Procedures :

 A. Installing the driver for IBM LAN Services 2.0

    To install the AE200.OS2 NDIS driver for IBM LAN Services 2.0 (LAN
    Server or LAN Requester), follow these steps:

    1. Insert this floppy into the floppy drive.

    2. Open the LAN Services folder( or run "LAPS" program from your IBMCOM
       subdirectory).

    3. Run OS/2 LAN Services Installation/Configuration.

    4. When the Basic or Advanced Installation/Configuration dialog box is
       displayed, choose Advanced.

    5. When the Install Type dialog box is displayed, choose Install or
       Configure this workstation.

    6. When the Installation and Configuration dialog box is displayed,
       choose Configure a component. Then choose OK.

    7. When the Configure dialog box is displayed, choose LAN Adapter and
       Protocol Support and choose Configure. Then choose OK.

    8. At the Options dialog box, choose Copy additional network adapter
       drivers. Then choose OK.

    9. At the Copy Additional Network Adapter Drivers dialog box, type the
       path (A:\NDIS\LANSRVR). Then choose OK.

   10. When the Copy Diskette dialog box is displayed, choose OK.

   11. When the Options dialog box is displayed, choose Configure Workstation.
       Then choose OK.

   12. When the Configure Workstation dialog box is displayed, remove the
       current configurations from the Current Configuration list box.

   13. Choose the AE-200 Series Ethernet Adapter from the Network Adapters
       list box, by highlighting the entry. Then choose Add to add the
       Adapter to Current Configuration list box.

   14. Highlight the appropriate protocols in the Protocols list box. Then
       choose Add to add them to the Current Configuration list box.

   15. Choose the AE-200 Series Ethernet Adapter driver at the Current
       Configuration list box. Then choose Edit. The Parameters for
       AE-200 Series Ethernet Adapter dialog box is displayed.

   16. View the default configuration. If the default configuration is
       appropriate, choose OK.

       If you need to change driver configuration, change the options in
       this dialog box.

    You have finished installing the AE200.OS2 driver for IBM LAN Services
    2.0.


 B. Installing the driver for IBM Extended Services 1.0

    To install the driver for IBM Extended Services 1.0, follow these steps:

    1. Insert the floppy into the floppy drive.

    2. Display the Communication Manager main menu and choose Advanced.

    3. Choose Configuration.

    4. Choose LAN Adapter and Protocol Support (LAPS).

    5. At the Options dialog box, choose Copy additional network adapter
       drivers. Then choose OK.

    6. At the Copy Additional Network Adapter Drivers dialog box, type the
       path (A:\NDIS\LANSRVR). Then choose OK.

    7. When the Copy Diskette dialog box is displayed, choose OK.

    8. When the Options dialog box is displayed, choose Configure Workstation.
       Then choose OK.

    9. When the Configure Workstation dialog box is displayed, remove the
       current configurations from the Current Configuration list box.

   10. Choose the AE-200 Series Ethernet Adapter from the Network Adapters
       list box, by highlighting the entry. Then choose Add to add the
       Adapter to Current Configuration list box.

   11. Highlight the appropriate protocols in the Protocols list box. Then
       choose Add to add them to the Current Configuration list box.

   12. Choose the AE-200 Series Ethernet Adapter at the Current Configuration
       list box. Then choose Edit. The Parameters for AE-200 Series Ethernet
       Adapter dialog box is displayed.

   13. View the default configuration. If the default configuration is
       appropriate, choose OK.

       If you need to change Adapter's configuration, change the options in
       this dialog box.

    You have finished installing the driver for IBM Extended Services 1.0.