SUPERCHARGER


JUMPER SETTINGS FOR ALTERNATE DMA PAGE ADDRESSES

                                
                     W2|W3|W4|W5|                 ***** LEGEND ****  
FACTORY SETTING       O  X  O  X                 X = POSITION OF JUMPER
A000                  X  X  X  X                 O = VACANT PIN
                      X  O  X  O
 -----------------------------------------
C000                  O  O  X  X
                      X  X  X  X
                      X  X  O  O
------------------------------------------
D000                  X  O  X  X
                      X  X  X  X
                      O  X  O  O
------------------------------------------
E000                  O  X  X  X
                      X  X  X  X
                      X  O  O  O
-------------------------------------------


JUMPER SETTINGS FOR PROCESSOR BOARD MEMORY SIZE


		     W6|W7|W8
FACTORY SETTING       X  X  O
512K                  X  X  X
                      O  O  X
------------------------------------------


JUMPER SETTING FOR POWER-ON SPEED SELECTION


		     W9
FACTORY SETTING       X
FAST (9.54 MHZ)       X
                      O
------------------------
SLOW (4.77 MHZ)       O
                      X
                      X
------------------------

NOTE:  THIS SETTING HAS EFFECT ONLY WHEN THE PROCESSOR BOARD CONTROL SWITCH
       IS IN THE SOFTWARE CONTROLLED POSITION.


POWER-ON SPEED CONTROL SWITCH SETTING


UP     = FAST (9.54 MHZ)
MIDDLE = SOFTWARE CONTROLLED
DOWN   = SLOW (4.77 MHZ)