File: pathwork.txt
3Com Corporation

3Com Megahertz 10/100 LAN + 56K Modem PC Card
(3CCFEM556 PC Card family)

============================================================
This file describes how to install the 3Com NDIS driver
for the DEC Pathworks (version 4.1 and version 5.1) for
DOS and Windows. The instructions assume the DEC Pathworks
software has been installed on the hard drive from the
installation diskettes or CD ROM. Refer to the DEC manual
for installation instructions if the software has not
been installed.  Refer to the DEC manual for templates and
options.  

This file includes the following topics:
 - Installing Drivers for DEC Pathworks v4.1
 - Installing Drivers for DEC Pathworks v5.1
 - SYSTEM.INI Information  

============================================================
Installing Drivers for DEC PATHWORKS v5.1
-----------------------------------------


Note: Please read the WFWNDIS2.TXT file on Installation
      Disk 2 if installing Pathworks with WFW v3.11. 

      Please run AutoLink on Installation Disk 2 if
      installing Pathworks with Retail NetWare or Netware
      with ODI drivers. 

1.  Go to the drive where Pathworks software is installed. 

2.  Change directory to PCAPP:

3.  Execute PWSETUP.

4.  Enter the directory where you want the software
    installed.  The default is C:\PW. 

5.  Choose CUSTOMIZE under the Select A Configuration
    Option menu.

6.  Choose a template in the Select a Workstation Template
    menu.

7.  Under the Customize: Modify Workstation Configuration
    menu, put an X mark besides the Network Adapter
    Information line.

8.  Additional menus will appear, choose the appropriate
    options for your network environment. Refer to the DEC
    manual if there are questions regarding these menus.

9.  Choose <Other Network Adapter> under the 
    Customize: Network Adapter Information menu.

10. If installing options other than Retail NetWare or
    Netware with ODI drivers. Type:

    a:\mslanman.dos\drivers\ethernet\FEM556N2\FEM556N2.dos

    on the Driver File: line. Type:

    a:\mslanman.dos\drivers\ethernet\FEM556N2\protocol.ini

    on the PROTOCOL.INI Stub: line. Type:

    a:\mslanman.dos\drivers\ethernet\FMENABLE.EXE

    on the Additional Files: line.
 
11. Verify that (l) Ethernet is marked and click on OK.

12. Click on OK under the  Customize: Network Adapter 
    Information menu.

13. Additional menus will appear, follow the DEC
    instructions to complete the installation.

14. Once the installation is complete, edit the config.sys
    file and add the following line immediately below the
    Card and Socket Services line (if using card and socket
    services) otherwise add it as the first line:

           DEVICE = C:\PW\FMENABLE.EXE

15. See SYSTEM.INI information below.

16. Reboot the system.

============================================================
Installing Drivers for DEC PATHWORKS v4.1
-----------------------------------------

To install DEC PATHWORKS version 4.1 on a DOS NDIS
workstation, DOS must be installed on the target
workstation C: drive, or you must have a bootable DOS
floppy.  Follow these steps:

1. Insert the PATHWORKS DOS Client Setup diskette version
   4.1 in your floppy drive.

2. Change to that drive and execute the NETSETUP.EXE
   program.

3. Follow the screens to select a Transport Protocol.

4. Insert the appropriate diskettes for the selection 
   you made in step 3.

5. Select your network adapter by typing ETHERNET.
 
6. Select the option (OTHER NDIS) adapters.

7. When prompted for the DRIVE:\PATH\FILENAME for the NDIS 
   driver, type:

   a:\mslanman.dos\drivers\ethernet\fem556n2\fem556n2.dos

8. When prompted for the full DRIVE:\PATH of the PROTOCOL.INI
   fragment, type:

   a:\ mslanman.dos\drivers\ethernet\fem556n2\protocol.ini

9. Follow the rest of the installation screens and the 
   procedure for writing the KEY DISK.

   The NETSETUP program will build the PROTOCOL.INI file
   for you and modify your startup files to use the adapter
   you have selected.

10. Copy FMENABLE.EXE from root directory of Installation
    Disk 2 to the root of the hard drive.  

11. Edit the config.sys file and add the following line 
    immediately below the Card and Socket Services line 
    (if using card and socket services) otherwise add it as 
    the first line:

          DEVICE = C:\FMENABLE.EXE

NOTE: You must add the /N parameter to the line in the 
      STARTNET.BAT file. That starts the network scheduler.

      For example: %BOOT%\DECNET\sch /h /n

=========================================================
SYSTEM.INI information
=======================

In order for the modem to function correctly in MS Windows,
add the following commands to your Windows SYSTEM.INI file
under the [386Enh] category: (In case they are not there
already)

[386Enh]
 COM1Base=3F8
 COM1Irq=4
 COM2Base=2F8
 COM2Irq=3
 COM3Base=3E8
 COM3Irq=4
 COM4Base=2E8
 COM4Irq=3

(%ver pathwork.txt v1.0)